SE106N pH Sensor | 170 mm| Glass Body | For samples with low conductivities or in coating media
Product number:
SE106N
Description
SE106N pH Sensor | 170 mm| Glass Body | For samples with low conductivities or in coating media
pH Sensor with Temperature Detector
- Liquid electrolyte, refillable
- Ground glass junction
- Integrated temperature detector
- Alpha glass for universal applications
The SE106N pH sensor with glass body and ground glass junction is a reliable sensor for precise pH measurements in the laboratory, including for samples with low conductivity.
Thanks to its special pH glass, the SE106N is suitable for measurements at low temperatures.
Applications
Chemical applications, quality control, food and beverages, aggressive media
We look forward to hearing from you!
Contact Us
| Body Length: | 170 mm / 6.69 inches |
|---|---|
| Body diameter: | 12 mm / 0.47 inches |
| Measurement Parameter: | pH |
| Measuring Range: | 0 … 14 pH |
| Temperature: | –5 … 100 °C (23 ... 212 °F) |
| Temperature Detector: | Pt1000 |
| Body Material: | Glass |
| Junction: | Ground glass |
| Reference System: | Ag/AgCl |
| pH Glass: | Alpha glass, universal applications, fluoride resistant |
| Electrolyte: | Liquid, 3 mol/l KCl, refillable |
| Sensor Head: | Laboratory Sensor head |
| Cable: | Fixed cable (length: 1 m / 3.28 ft) |
Downloads
Data Sheets
Certificates
Safety guides
Our service
Related Products
SE101-AN pH Sensor | 112 mm | Polysulfone Body | For environmental analysis and water management
Product number:
SE101-AN
SE102-AN pH Sensor | 110 mm | Glass Body | For Precision measurements and chemical applications
Product number:
SE102-AN
SE104N pH Puncture Sensor | Noryl Plastic Body | For semi-solid and viscous samples
Product number:
SE104N
SE715 Oxygen Sensor | Memosens | 120 mm | For water and wastewater treatment
Product number:
SE715/1-MS
Relevant Blog Posts
Jan 2018
Interface Technology
Knick Products Comply With UL - What Does That Mean?
There are different assessments and approaches to reach an adequate level of safety. Manufacturers are typically on the “safe” side, if they comply with recognized standards.