Circuits d’eau d’alimentation de la chaudière
Mesure du pH, de l’oxygène dissous et de la conductivité comme paramètres essentiels dans le circuit d’eau d’alimentation de la chaudière.
Lire plus
Solutions Process Analytics
Quality Control for Raw Milk Delivery
High quality requirements are placed on raw milk, and online monitoring of truck unloading procedure at the dairy prevents inferior quality (sour milk) from spoiling the entire stock of the storage tank.
Water Treatment Systems
Measuring of pH, dissolved oxygen and ORP in different applications while Water Treatment process of Power Plants’ Wastewater.
Ion Exchange Systems
Measuring of pH, dissolved oxygen and conductivity in boiler feed water, steam and condensate in combined cycle gas turbine in power plants.
Flue Gas Desulfurization
Measuring of pH in Pre-Scrubber, in Neutralization and in Lime Scrubber within the Flue Gas Desulfurization Process in Power Plants.
Cooling Water Systems
Measurement of pH, ORP and conductivity in cooling water, which must be continuously treated with acid and biocides.
Reverse Osmosis Systems
Measuring of pH, ORP and conductivity to check permeate quality and concentrated water as well as checking on module leakage.
Combined Cycle Gas Turbine
Measuring of pH, dissolved oxygen and conductivity in boiler feed water, steam and condensate in combined cycle gas turbine in power plants.
Détection de rupture pour les échangeurs de chaleur
La vapeur refroidie dans la partie inférieure se dépose sous la forme d’eau de condensation qui présente une grande pureté et donc une conductivité très faible. Sachant qu’une conductivité élevée est le signe d’impuretés, la mesure de la conductivité du condensat est une méthode fiable pour…
Process Control in Pulp and Paper Production
Many measuring points in pulp production are positioned in environments where the presence of technical personnel must be restricted to a minimum. Due to the aggressive process media with high solids…
Monitoring Raw Water Inlet for Drinking Water Treatment
Recording raw water values plays a key role in the overall process of drinking water treatment. Measures for neutralizing extreme pH values or oxidation-reduction potentials are not only taken in the spirit of health compatibility, but also…
Plant Utilities: Optimization of Liquids Analysis
In industrial processing plants such as oil refineries and pharmaceutical or chemical factories, many utility plants provide and extract the auxiliary media required by the main process. Water – derived from…
Flue Gas Cleaning during Sewage Sludge Incineration
Biological wastewater treatment plants produce toxic sludge that must undergo a phosphorous recovery process. The hazardous gases released during …
Monitoring Reverse Osmosis Systems
Reverse osmosis systems are used in a wide range of industrial applications for water treatment. The main application is industrial seawater desalination. Reverse osmosis…
Monitoring Steam Generators
Since steam generator functions are critical to applications and their downtime or replacement is extremely cost intensive, it is important to avoid damage due to wear…
Monitoring Cooling Towers
Cooling towers are used in a range of industrial sectors for diverting process heat from cooling circuits. Mineral deposits and corrosion reduce efficiency and lead to the premature wear of system components…
Monitoring Brewery Processes
The taste and quality of beer greatly depend on the quality of the water used to brew it. pH and conductivity measurements determine its quality. Globalization is putting massive competitive pressure…
Monitoring CIP/SIP Processes
In pharmaceutical, biological or process systems for food production, all process-wetted system components must be cleaned and sterilized at regular intervals…
Industrial Wastewater Treatment
Depending on the sector, industrial wastewater is polluted by heavy metals, grease, oil, alkaline substances or, as in the paper and soap sectors, organic substances that can only be neutralized or separated with great effort.
Monitoring Sugar Production
pH sensors are subject to extreme requirements during sugar production. Lime is dosed based on pH measurement right from the start: during the beet washing phase, in which water is made alkaline by adding calcium oxide to neutralize the acidic soil from the field that is still clinging to the beets…
