A20300 Signal Doubler | 4-Port Isolation | Space-saving in 6 mm Enclosure
Product number:
A20300
Description
A20300 Signal Doubler | 4-Port Isolation | Space-saving in 6 mm Enclosure
Signal doublers with two switchable calibrated outputs in a 6 mm housing, also for applications with high output loads.
- Safety in the smallest space
4-port isolation in 6 mm modularhousing - Signal doubling
combined with signal conversion - Load increase
up to 1000 ohms possible for inputs with high input impedances - Standards-compliant personal protection
through protective separation according to EN 61140 - Flexible use
with DIP switches accessible from the outside - Calibrated range selection
without complicated trimming - Low-cost solution
Only one compact, low-cost device is required instead of two conventional isolators - International use
UL/CSA approvals - 5-year warranty
The A20300 signal doubler is an extremely compact product which also provides a cost-effective solution to the problem of isolating and transmitting 0(4) to 20 mA and 0 to 10 V standard signals to two 0(4) to 20 mA output channels with galvanic isolation of the input, outputs, and power supply.
Its input, both outputs, and power supply are decoupled from one another (four-port isolation).
We look forward to hearing from you!
Contact Us
| Function: | Decoupled distribution of standard signals |
|---|---|
| Input: | 0 ... 10 V, 0 ... 20 mA, 4 ... 20 mA |
| Output: | 0 ... 20 mA, 4 ... 20 mA |
| Isolation AC/DC: | up to 300 V |
| Test Voltage: | up to 2.5 kV AC |
| Power Supply: | 24 V DC |
| Ambient operating temperature: | 0 … 55 °C |
| Dimensions (W x L x H): | 6.2 x 93 x 101 mm |
| Special features: | 2 electrically isolated outputs, each with full load of 500 ohms, All channels galvanically decoupled (4-port isolation), Signal doubler with calibrated, switchable inputs and outputs |
| Product Category: | Signal Multiplier |
Downloads
Manuals
Certificates
Our service
Used in Process or Applications
Relevant Blog Posts
Apr 2023
Process Analytics
Sturdy 2-Electrodes Conductivity Sensor SE625 with Coaxial Electrodes made of Titanium
The SE625 ensures reliable and accurate determination of the conductivity of ultrapure water in the semiconductor industry.
Jun 2022
Process Analytics
Combined pH- and ORP-Sensor SE555X/*-AMSN
Combined pH and ORP measurement in one sensor SE555 saves place and equipment costs for demanding requirements in the chemical industry, the food sector and for hygienic applications.
Nov 2021
Process Analytics
SE655X Digital and SE656X Digital - Digital Conductivity Sensors with Ex Certification
The SE655X digital and SE656X digital conductivity sensors with Memosens protocol are now also available with Ex certification.
May 2021
Process Analytics
New SE656N digital conductivity sensor
New toroidal Digital Conductivity Sensor with a large measuring range and consisting of PFA for using in aggressive media
Feb 2018
Process Analytics
How to get the sensor into the process
Sensors as the direct interface to the process must be exactly matched to the chemistry of the measured medium and to the prevailing pressure and temperature conditions.