SensoTrans DMS P 32200

Strain Gauge Transmitter

The universal SensoTrans DMS P 32200 strain gauge transmitters provide connection possibilities for all standard strain gauge force transducers and strain gauge load cells in full bridge configuration.
They can be flexibly adapted to the respective measuring task using DIP and rotary encoder switches or via an IrDA® port.


  • Universal usability for strain gauges, pressure and load cells,
    and other resistive measuring bridges
  •  Convenient setting of all parameters via IrDA interface
    • Uncomplicated, menu-guided adjustment also “on site“ including archiving of the configuration data
  • Intuitive configuration of the basic parameters
    • Easy, without tools, using 4 rotary and 8 DIP switches
  • Calibrated range selection
    • No complicated trimming
  • Convenient adjustment
    • Zero point and sensitivity adjustable via IrDA® port
  • Simulation of any desired output values for correct installation/commissioning
  • Protective separation according to EN 61140
    • Protection of the maintenance staff and subsequent devices
      against excessively high voltages up to 300 V AC/DC
  • Functional safety up to SIL 2 (up to SIL 3 in case of redundant configuration) with TÜV certificate
    • Systematically developed according to EN 61508
  • High accuracy due to innovative circuit design
  •  Minimum space consumption in the enclosure
    • Modular housing: just 6 mm wide
    • More transmitters per meter of DIN rail
  • Low-cost assembly
    • Quick mounting, convenient connection of power supply through DIN rail bus connectors
      (in case of 24 V DC power supply)
  • 5-year warranty


3-port isolation with protective separation up to 300 V AC/DC according to EN 61140 ensures optimal protection of personnel and equipment as well as unaltered transmission of the measurement signals. The SensoTrans DMS P 32200 offer maximum performance in the smallest of spaces.

Adjusting the zero point and sensitivity to the individual strain gauge sensor is particularly convenient via the infrared port, for example using a PDA. Sensors with known characteristics can be very easily calibrated using 4 rotary encoder switches and 8 DIP switches. Special measuring tasks can be solved with SensoTrans devices that Knick configures according to individual specifications. Fixed-range devices without switches are used, for example, when manipulations or mix-ups must be precluded.

Knick offers the SensoTrans DMS P 32200 transmitter with SIL approval for applications with high demands on functional safety. The requirements of EN 61508 were implemented through specially developed hardware and software. The implemented fail-safe concept makes use of structural measures at the device level (redundancy of system components) and diagnostic methods for selective fault detection. The product is SIL 2 approved (EN 61508) by an authorized body (TÜV Rheinland). SIL 3 in redundant implementations.




Catalog Excerpts

Catalog Excerpt - SensoTrans DMS P 32200

Catalog Excerpt (en)

1457 |  SensoTrans DMS P32200
Product Description | Specifications | Product Range
PDF (file size: 1 MB)


Manual - SensoTrans DMS P 32200

Manual (en)

1462 |  SensoTrans P 32200 P0/
PDF (file size: 1.21 MB)
SIL Safety Manual - SensoTrans DMS P 32200

SIL Safety Manual (en)

1376 |  P32*00P0/1
PDF (file size: 2.07 MB)
Manual - SensoTrans DMS P 32200

Manual (en)

13391 |  ZU 0677 (Power terminal block)
PDF (file size: 0.22 MB)

Certificates / Approvals

EU Declaration of Conformity - SensoTrans DMS P 32200

EU Declaration of Conformity (en)

13790 |  Series A20210PO, P32100PO, A20220PO, P32200PO, A20230PO, P32300PO, P32000PO
Document No. EU220125H | 2022-01-25
PDF (file size: 1.8 MB)
Certificate of Compliance (UL) - SensoTrans DMS P 32200

Certificate of Compliance (UL) (en)

11411 |  No. 20181015-E220033 | 2018-OCTOBER-15
P32*00P0/**, A202*0P0..., BL520
PDF (file size: 0.24 MB)

Certificate "Functional Safety" (SIL) (en)

11853 |  Transmitter Series P32*** P0/1
Document No. 968/EZ 272.00/07 | 2007-10-12
PDF (file size: 0.66 MB)


Software - SensoTrans DMS P 32200

Software (en)

12156 |  Paraly SW 111 Configuration Software for the Series P 32000 transmitters (for Windows)
ZIP (file size: 0.91 MB)
Manual - SensoTrans DMS P 32200

Manual (en)

14091 |  for Software Paraly SW 111 for PDA and PC
PDF (file size: 3.22 MB)