Skip to main content Skip to search Skip to main navigation

P27000 Isolated Signal Conditioner | 480 Measuring Ranges Calibrated and Switchable | Broad-range Power Supply

Description

P27000 Isolated Signal Conditioner | 480 Measuring Ranges Calibrated and Switchable | Broad-range Power Supply

The “Multimeter” among the signal conditioners. With 480 switchable calibrated ranges and broad-range power supply.

  • Flexible and extremely precise
    Calibrated range selection without complicated readjustments
  • Broad-range power supply
    20 … 253 V AC/DC
  • Compact design
    12.5 mm modular housing; up to 80 active isolators per meter of mounting rail
  • Quick and easy configuration
    Housing can be easily opened
  • Pluggable screw terminals
    Simple, time-saving assembly and prewiring of enclosures
  • 3-port separation
    Protection against incorrect measurements or damage
  • Maximum accuracy
  • Specific test report
    Following EN 10204 2.2
  • Protective separation
    According to EN 61140. Protection against unacceptably high voltages (for example, with shunt measurements at high potentials or in 3-phase systems)
  • Maximum reliability 
    No repair and failure costs
  • 5-year warranty

The isolation amplifiers provide safe galvanic isolation for any input signals from ±20 mV to ±200 V and from ±0.1 mA to ±100 mA.

We look forward to hearing from you!
Contact Us

Technical details

Function: Current and voltage measurement
Input: 0 ... (±)0.1 mA up to 0 ... (±)100 mA, 0 ... (±)10 V, 0 ... (±)20 mA, 0 ... (±)20 mV up to 0 ... (±)200 V, 4 ... 20 mA
Output: 0 ... (±)10 V, 0 ... (±)20 mA, 4 ... 20 mA
Isolation AC/DC: up to 1,000 V
Test Voltage: 5 kV AC
Power Supply: 22 ... 230 V AC/DC
Cutoff Frequency: Switchable cutoff frequency 10 kHz or 10 Hz; other cutoff frequencies on request
Ambient operating temperature: –10 ... 70 °C
Dimensions (W x L x H): 12.5 x 99 x 111 mm
Special features: Calibrated switching of 480 input and output ranges using DIP switches, The "Multimeter" among the signal conditioners
Product Category: Isolated Signal Conditioner

Downloads

Manuals

[10953] User Manual (DE, EN)
P27000-S008
Version 04
[1302] User Manual (DE, EN, FR)
P27000
Version 06
[10940] User Manual (DE, EN)
P27000-S0011
Version 01
[10880] User Manual (DE, EN)
P27000-S009
Version 04

Brochures

[14160] Brochure
Product Overview Interface Technology

Data Sheets

[1291] Data sheet
P27000
Product Description | Specifications | Product Range

Certificates

[11827] Certificate of Compliance (UL)
Series P27000 through P27099...
Process Control Equipment for Use in Hazardous Locations
No. E308146 | 2018-10-29
[12124] EU Declaration of Conformity (DE, EN, FR)
P27***H1…, P27***F1…
No. EU240613A | 2024-06-13
[11771] Certificate of Compliance (UL)
Series P 27000 through P 27099...
Process Control Equipment for Use in Zone Classified Hazardous Locations
No. E3402288 | 2018-10-15
[11577] Type Approval Certificate (DNV)
P270X Y1
No: TAA000011Y
Revision No: 3
[14100] Quality Report (MTBF)
Document No. TX180228A
Failure Rate
[11779] Certificate of Compliance (UL)
Series P 270**BL570
Process Control Equipment, Electrical
No. E340287 | 2019-11-22

Software

[11876] Knick Produktmakros (.pdf)
ePLAN Electric P8
[12153] Software
VariSoft SW 108 Configuration Software
[11875] Knick Produktmakros
ePLAN P4 (.pdf)
[12144] Software
ePLAN P4 Produktmakros
[12154] Software (.zip)
ePLAN P8 Produktmakros

Our service

Used in Process or Applications

In order to guarantee the optimal output, modern wind turbines contain a range of sensors whose measuring signals must be acquired, converted, and queried – in many cases over long distances.

Relevant Blog Posts

SE605H conductivity sensor with CondCheck: Integrated sockets for connecting a resistance decade

SE605H Conductivity Sensor with CondCheck

The SE605H conductivity sensor with CondCheck enables USP 645 verification without interrupting the measuring chain.

pH and conductivity measurement in vaccine production

Pharmaceutical contract manufacturer relies on Knick's transmitters for modular production plants for Covid-19 vaccines.

Sturdy 2-Electrodes Conductivity Sensor SE625 with Coaxial Electrodes made of Titanium

The SE625 ensures reliable and accurate determination of the conductivity of ultrapure water in the semiconductor industry.

SE655X Digital and SE656X Digital - Digital Conductivity Sensors with Ex Certification

The SE655X digital and SE656X digital conductivity sensors with Memosens protocol are now also available with Ex certification.

New SE656N digital conductivity sensor

New toroidal Digital Conductivity Sensor with a large measuring range and consisting of PFA for using in aggressive media

High-Precision Conductivity Measurement at Extreme Temperature Differences

Pharmaceutical manufacturer, EVER Pharma Jena uses the extremely robust conductivity sensors SE605(H) and SE680 with Memosens technology from Knick.