A20300 Signal Doubler | 4-Port Isolation | Space-saving in 6 mm Enclosure
Product number:
A20300
Description
A20300 Signal Doubler | 4-Port Isolation | Space-saving in 6 mm Enclosure
Signal doublers with two switchable calibrated outputs in a 6 mm housing, also for applications with high output loads.
- Safety in the smallest space
4-port isolation in 6 mm modularhousing - Signal doubling
combined with signal conversion - Load increase
up to 1000 ohms possible for inputs with high input impedances - Standards-compliant personal protection
through protective separation according to EN 61140 - Flexible use
with DIP switches accessible from the outside - Calibrated range selection
without complicated trimming - Low-cost solution
Only one compact, low-cost device is required instead of two conventional isolators - International use
UL/CSA approvals - 5-year warranty
The A20300 signal doubler is an extremely compact product which also provides a cost-effective solution to the problem of isolating and transmitting 0(4) to 20 mA and 0 to 10 V standard signals to two 0(4) to 20 mA output channels with galvanic isolation of the input, outputs, and power supply.
Its input, both outputs, and power supply are decoupled from one another (four-port isolation).
We look forward to hearing from you!
Contact Us
| Function: | Decoupled distribution of standard signals |
|---|---|
| Input: | 0 ... 10 V, 0 ... 20 mA, 4 ... 20 mA |
| Output: | 0 ... 20 mA, 4 ... 20 mA |
| Isolation AC/DC: | up to 300 V |
| Test Voltage: | Up to 2.5 kV AC |
| Power Supply: | 24 V DC |
| Ambient operating temperature: | 0 … 55 °C |
| Dimensions (W x L x H): | 6.2 x 93 x 101 mm |
| Special features: | 2 electrically isolated outputs, each with full load of 500 ohms, All channels galvanically decoupled (4-port isolation), Signal doubler with calibrated, switchable inputs and outputs |
| Product Category: | Signal Multiplier |
