Stratos Pro A201 CONDI Inductive Conductivity Transmitter | Analog Sensors | Ex Zone 0/1 | HART | 4 ... 20 mA Output
제품 번호:
A201X-CONDI-0
Description
Stratos Pro A201 CONDI Inductive Conductivity Transmitter | Analog Sensors | Ex Zone 0/1 | HART | 4 ... 20 mA Output
2-wire analyzer for conductivity measurement
- Explosion protection: Zone 1 / Class 1 Division 1 (with sensor in Zone)
- Digital communication: HART
- Intuitive operation with color-coded user guidance
- IP 66/67, NEMA 4X protection
- Automatic sensor identification
- Sensor diagnostic with wear indication, remaining lifetime, CIP/SIP counter and adaptive calibration timer
- High-contrast widescreen display with colored backlighting
- Protective pane made of safety glass
- One analog input (4 ... 20 mA) e.g. for external pressure compensation
- Two parameter sets
- Two digital inputs:
- External HOLD activation
- External switching between parameter set
- Logbook (200 entries)
Outstanding properties
A number of outstanding technological properties make the Stratos Pro series the new benchmark for 2-wire analyzers. Colored screen backlighting has been implemented for the first time in this device class, with the lowest possible power consumption.
A number of outstanding technological properties make the Stratos Pro series the new benchmark for 2-wire analyzers. Colored screen backlighting has been implemented for the first time in this device class, with the lowest possible power consumption.
Wide Range of Functions
2 digital inputs are provided, as well as an analog input plus a second current output for another measured value.
2 digital inputs are provided, as well as an analog input plus a second current output for another measured value.
Zone 1 Explosion Protection
Stratos Pro is designed for operation in Zone 1 / Class 1 Division 1 hazardous areas (with the sensor in Zone 0). Operation in hazardous areas from –20 °C to +65 °C is possible. The devices are designed for gas and dust explosion protection (G/D) and can naturally also be used outdoors (type 4 enclosure, UV resistant).
Stratos Pro is designed for operation in Zone 1 / Class 1 Division 1 hazardous areas (with the sensor in Zone 0). Operation in hazardous areas from –20 °C to +65 °C is possible. The devices are designed for gas and dust explosion protection (G/D) and can naturally also be used outdoors (type 4 enclosure, UV resistant).
여러분의 의견을 기다리겠습니다!
문의하기
| 센서 연결: | 아날로그 |
|---|---|
| 전류 출력: | 1x 4…20 mA |
| 제품 라인: | Stratos, Stratos Pro |
| 측정 파라미터 : | 전도도(유도식) |
| 통신(디지털 출력): | HART |
| 방폭인증 여부: | 예, 전 구역 1 |
다운로드
사용 설명서 (매뉴얼)
브로셔
인증서
Safety guides
제어 도면
Software
서비스
프로세스 또는 애플리케이션에서 사용
관련 제품
제품 갤러리 건너뛰기
Stratos Pro A201 MSCOND 전도도 측정 기기 | Memosens 센서 | 방폭 Zone 2 | HART | 4 ... 20 mA 출력
제품 번호:
A201B-MSCOND-0
Stratos Pro A201 MSCONDI 유도식 전도도 측정 기기 | Memosens 센서 | HART | 2개의 4 ... 20 mA 출력
제품 번호:
A201N-MSCONDI-1
관련 블로그 게시물
4월 2023
Process Analytics
pH and conductivity measurement in vaccine production
Pharmaceutical contract manufacturer relies on Knick's transmitters for modular production plants for Covid-19 vaccines.
2월 2022
Process Analytics
Profinet을 채택한 새로운 트랜스미터 Stratos Multi E461N
새로운 멀티 파라미터 트랜스미터 Stratos Multi E461N의 Profinet 인터페이스는 현장 레벨에서 시작하여 가장 많이 사용되는 공정 제어 시스템에 이르기까지 공정 파라미터와 예방적 유지 보수에 대한 연속적인 통신을 가능하게 합니다.
10월 2021
Process Analytics
Stratos Multi E401X - 방폭 지역용 멀티 파라미터 트랜스미터
신제품 Stratos Multi E401X의 경우 구역 분리가 트랜스미터에서 바로 이루어지기 때문에 설치 시 별도로 특별한 방폭 액세서리가 필요하지 않습니다.
11월 2016
Process Analytics
The Big Three of the Process Industry: HART, FF, Profibus
Our Knick multi-parameter analyzers are now available with Profibus and FF interfaces. Even for hazardous areas.