메인 콘텐츠로 건너뛰기

에너지 저장

배터리 저장 시스템 및 저장소는 다양한 산업 분야에서 대량의 에너지를 분산적으로 저장하고 제공하는 것을 보장합니다. 전기 이동수단을 위한 충전소부터 풍력 및 태양광 발전 시스템의 잉여 전력 저장과 변전소에서의 전압 조정까지 그 적용 범위가 넓습니다. 특히 발전소, 데이터 센터 및 다른 주요 인프라 시설의 독립적인 전원 공급을 위한 배터리 저장 시스템이 결정적인 역할을 합니다.

고전압 모니터링 및 전류 측정

셀 전압 및 전류는 한편으로는 충전 상태를 확인하고 모니터링하기 위해 지속적이고 정밀하게 측정해야 하며, 다른 한편으로 이러한 측정은 노후화로 인한 용량 감소 또는 셀 결함을 적시에 인식하고 해결하기 위한 예방적 유지보수의 기반을 형성합니다. 일반적으로 대형 배터리 시스템의 측정을 위한 한 가지과제는 매우 높은 전압과 전류입니다. 또한 개별 배터리 셀의 부분 모니터링 또는 제한된 분석을 위해서는 높은 전위에서 낮은 전압을 측정해야 합니다. 따라서 안전상의 이유로 트랜스미터에는 매우 높은 수준의 절연이 필요합니다.

왜 크닉입니까?
크닉의 고전압 트랜스미터 프로그램은 안전한 테스트와 셀, 스택 또는 스트링 수준에서의 지속적인 베터리 시스템 모니터링을 위한 입증된 솔루션을 제공합니다. 여기에는 외함, 저장소 벽면 등에서 최대 (±)4200 V의 위험 전압의 존재를 감지하고 다운스트림 보호 장비에 이를 보고하는 전압 감지를 위한 장치가 포함됩니다.

Related Applications

문의사항이 있으십니까? 크닉이 도와드립니다.
크닉에 문의하세요.

적합한 제품

에너지에 관한 최신 블로그 포스트

Interface Technology

Stack and String Voltage Measurement in Electrolyzers and Fuel Cells

Voltage, current and temperature measurement in electrolyzers with P40000 series high voltage transducers

크닉 트랜스미터를 위한 새로운 30mV 분로 저항기

크닉은 이제 전압 강하가 30mV인 분로 저항기를 포함하도록 고전압 트랜스미터용 액세서리 제품군을 확장함
Innovations at InnoTrans 2024

Innovations at InnoTrans 2024 for rolling stock and DC traction power supply

At InnoTrans 2024 Knick presents electrical measurement solutions for rolling stock and DC traction power supply applications

Knick Austria - direct customer contact in Austria from 2024

Reorganization of sales in Austria and new contacts in the field of process analytics and interface technology

Energy storage - the handshake between renewable energy and electric vehicles

Energy storage technology such as battery and hydrogen are critical for growth and continuous development of renewable energy and e-mobility.

전압 검출기 P52000VPD는 최대 4200 V DC까지 전압을 안정적으로 감지합니다.

새로운 전압 감지기 P52000VPD(전압 존재 감지)는 고전압 영역을 안정적으로 모니터링하고 전압이 지정된 임계값에 도달하면 신호를 다운스트림 시스템 제어 장치로 전송합니다.

Knick Interface at Battery and Electric & Hybrid Vehicle Technology Expo

Knick will be showcasing high-voltage electrical measurement and signal conversion products.

VariTrans A20340 - 단 하나의 절연 증폭기에서 표준 신호 4배율

The A20340 can output a standard input signal to four calibrated and galvanically isolated outputs in parallel.

Electrical measurement and process analytics for hydrogen production

Knick products optimize hydrogen production in the process and in electrolyser operation.

Condition Monitoring of High-Voltage Motors

Having an active predictive maintenance campaign in place for large rotating equipment can be a key strategy for maximizing process uptime.

Pulse frequency conditioner for speed sensors

The new P16000 from Knick is a pulse frequency conditioner that converts frequency signals from speed sensors into standard signals.

±2200 V까지 사용할 수 있는 세계에서 가장 작은 절연 증폭기

저희 Knick의 VariTrans P 40000 시리즈를 통해 ± 50 mV에서 ± 3600 V까지의 전압과 ± 100 mA에서 ± 20 kA까지의 전류의 안정적인 측정이 가능합니다. 이미 입증된 ProLine 제품군에 DIN 레일 설치를 할 수 있도록 작은 외함을 가진 절연 증폭기 P42000D2가 추가됐습니다.

Importance of broad-range power supplies for DC electrical measurement

Many DC electrical measurement products manufactured by Knick contain universal, also known as broad-range, power supplies.

Measuring Photovoltaic Degradation

Photovoltaic (PV) array degradation is an important aspect to consider for system design and installation.

Electrical Measurement Solutions: Control from 480 to 4800 Volts

Voltage and current transducers from Knick bring true control to electrical measurement applications across a wide-range of industries.

Benefits of High Voltage Transducers versus Instrument Transformers

When a need arises to step voltage in a circuit either up or down for purposes of power transmission or distribution, there is no doubt that transformers are essential.

Shunt Resistor versus Hall Effect Technology

There are many systems where measurement of large DC currents are needed for performance and safety.

MTBF beyond 3000 years: A snap hook for your plant

Failure of equipment on the plant floor can lead to considerable and costly disruption.

Knick Products Comply With UL - What Does That Mean?

There are different assessments and approaches to reach an adequate level of safety. Manufacturers are typically on the “safe” side, if they comply with recognized standards.

High-voltage transducer offers more safety on railway vehicles

The requirements placed on railway vehicles have increased significantly in recent years. Products for rolling stock need to ensure a higher level of functional safety than ever before.

True RMS Measurement with P41000TRMS

Traditional millivolt AC transducers are very susceptible to errors due to their poor insulation and are only designed for pure sinewave measurement.

Functional safety and maximum availability can go together

The requirements on operational and safety-related circuits are continuously growing.
>