메인 콘텐츠로 건너뛰기 검색으로 건너뛰기 메인 메뉴로 건너뛰기

Current Measurement for High-Speed DC Circuit Breakers

Key facts about the application

Sector

Data centers and high-power DC distribution systems

Application

Shunt-based current measurement for high-speed and solid-state circuit breaker protection coordination in 800 V DC distribution architectures

Measured Parameter

Bidirectional DC current measurement via shunt resistor for protection relays, breaker controllers, and monitoring systems

Main Requirements

Fast response time, high accuracy, long-term stability, galvanic isolation, and immunity to common-mode disturbances and to electromagnetic interferences in high-power DC environments

Current Measurement for High-Speed DC Circuit Breakers

Proven protection and monitoring technology for 800 to 1500 V DC data centers

Modern data centers are rapidly increasing in power density as AI workloads drive unprecedented energy demands. To improve efficiency and reduce distribution losses, operators are transitioning toward 800 V DC power architectures. As power levels continue to rise and distribution shifts toward high-voltage DC, reliable electrical protection becomes increasingly critical to safeguard infrastructure and maintain 99.999% uptime. High-speed and solid-state circuit breakers are emerging to meet this need, but their ability to distinguish normal load transients from true fault conditions depends on fast, accurate current measurements that enable protection systems to respond quickly and reliably.

Description and requirements

As power densities increase and high-voltage DC architectures become more prevalent, the consequences of electrical faults become increasingly severe. Undetected faults can damage costly power distribution equipment, disrupt critical computing workloads, and reduce system availability, while unnecessary breaker trips interrupt healthy circuits and compromise uptime. Protection systems must therefore respond quickly to genuine fault conditions while remaining stable during normal operation.

This challenge is becoming more complex as AI workloads produce increasingly dynamic power profiles, causing rapid changes in current demand as computing resources are allocated and released. High-speed and solid-state circuit breakers rely on protection algorithms to distinguish these normal operating conditions from true fault currents, making the quality of the current measurement fundamental to reliable protection.

To support accurate protection decisions, current measurements must provide high accuracy, fast response, excellent common-mode immunity, and long-term stability. Reinforced galvanic isolation is equally essential to protect personnel, control systems, and downstream equipment while ensuring dependable operation in demanding high-power DC environments.

Why Knick ?
The P41000 high-voltage transducer delivers shunt-based high current measurements up to 20 kA for high-speed and solid-state circuit breaker applications. By accurately measuring the voltage drop across a shunt resistor, it provides highly stable, drift-free current signals that enable protection algorithms to reliably distinguish normal operating conditions from true fault events. Fast response time, high common-mode immunity, and reinforced galvanic isolation ensure dependable performance in electrically demanding DC environments. Proven in high-voltage DC protection applications for over two decades, the P41000 provides the precise current measurement needed to support the next generation of 800 V DC data center protection systems.

Conclusion

With AI-driven data centers transitioning toward 800 V DC power distribution, reliable protection depends on current measurements that are fast, accurate, and stable under all operating conditions. The P41000 provides the precise, isolated current signals needed for protection algorithms to distinguish normal operating behavior from true fault events, supporting both system availability and equipment safety. Backed by decades of proven performance in demanding high-voltage DC protection applications, Knick’s measurement technology is ready today to support the next generation of high-speed and solid-state circuit breaker solutions for modern data centers.

Headline Crosseling Products H2

제품 갤러리 건너뛰기
P41000 고전압 절연 증폭기 / 트랜스미터 | 교정 전환 가능
P41000 고전압 절연 증폭기 / 트랜스미터 | 교정 전환 가능
제품 번호:

P41000

입력: 0 ... (±)50 mV 최대 0 ... (±)100 V

전위 차단 AC/DC: 최대 3,600 V

분로 저항 | 높은 과부하 용량 | 외부장의 영향을 받지 않음
분로 저항 | 높은 과부하 용량 | 외부장의 영향을 받지 않음
제품 번호:

maconic

입력: 0 ... 1 A 최대 0 ... 20 kA

ZU1475 HV 신호 케이블
ZU1475 HV 신호 케이블
제품 번호:

ZU1475

Headline Crosslinked Categories (Process, Application)

High-isolation measurement solutions built for modern DC data center architectures.
Product Overview


Download the product brochure: With its comprehensive range of signal conditioners and transducers, Knick offers solutions that meet the highest standards of safety, precision, robustness and durability.

Headline Crosslinked Blog Posts H2

Let's Meet at InnoTrans 2026!

Visit Knick this year in Hall 17, Booth 225. Discover new solutions for rolling stock and traction power supply.

핵융합 에너지 시스템의 정밀 측정 기술

저레벨 전기 신호 측정: 안전한 핵융합 시스템 구현의 핵심인 정밀 측정 기술.

The Shift to 800 V DC in AI Data Centers — and Why Precise Measurement Is Critical

Reliable current, voltage, temperature and fault monitoring for high-density architectures.

안전이 중요한 분야를 위한 SIL 인증 속도 신호 2배율화

간편해진 추가 장착, 신규 차량 도입 비용 절감: 새로운 범용 회전 속도 신호 2배기 P16890.

The Power Behind Data AI & Data Centers

Empower AI with precision: High-voltage measurement solutions from Knick deliver real-time, reliable data.