Knick Products Comply With UL - What Does That Mean?
It is pretty universally agreed upon that electro-technical products, used in critical or dangerous applications, pose no danger, themselves. There are, however, different assessments and approaches to reach an adequate level of safety. Users and manufacturers of such products are typically on the “safe” side, if they comply with recognized standards.
In the US, UL standards are recognized as technical rules with a legal character
Underwriters Laboratories (UL for short) is an independent organization that develops safety standards and examines and certifies products for compliance with these standards. UL is also a Nationally Recognized Testing Laboratory (NRTL), designated by the Occupational Safety and Health Administration (OSHA). The safety of electro technical products concerns electrical safety. But of course, it applies to fire protection as well, because fires can be triggered by electrical energy. In particular, these two aspects, fire safety and electrical safety, will be checked by UL for a product certification.
Knick products sold in the US have been UL certified, either listed as a device by UL or recognized as a component. The products are marked with the corresponding UL mark. In addition to the “Standard for Industrial Control Equipment” UL 508, the standard UL 61010 “Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use” is also applied. UL6 1010 is largely harmonized with the corresponding international standard IEC 61010 and thus also the European standard EN 61010. In a globalized world, “stationary products” are transported across borders and used, so uniform standards are necessary.
For products intended for use in potentially explosive atmospheres, there are additional requirements. It must be ensured that device components cannot produce sparks, which could potentially ignite explosive mixtures. Some of the Knick Interface products are certified by UL “For Use in Zone Classified Hazardous Locations”.
UL certified products can be viewed online at UL’s Online Certification Directory.
Latest Posts
Productos asignados
A20220
Aislamiento CA/CC: Hasta 300 V
A20210
Aislamiento CA/CC: Hasta 300 V
Entrada: Tensiones shunt hasta ±1000 mV, Termopares, Resistencias, Termorresistencias
P32200
Aislamiento CA/CC: Hasta 300 V
Entrada: Células de carga, Galgas extensométricas
P32300
Aislamiento CA/CC: Hasta 300 V
Entrada: Potenciómetros, Resistencias
A26000
Aislamiento CA/CC: Hasta 1000 V
Entrada: 0 ... (±)10 V, 0 ... (±)20 mA
P32100
Aislamiento CA/CC: Hasta 300 V
Entrada: Tensiones shunt hasta ±1000 mV, Termopares, Resistencias, Termorresistencias
P15000
Aislamiento CA/CC: Hasta 1000 V
Entrada: 0 ... 10 V, 4 ... 20 mA, 0 ... 20 mA
P22400
Aislamiento CA/CC: Hasta 600 V
Entrada: 4 ... 20 mA, 0 ... 20 mA
A20100
Aislamiento CA/CC: Hasta 600 V
Entrada: 4 ... 20 mA
A20230
Aislamiento CA/CC: Hasta 300 V
Entrada: Potenciómetros, Resistencias
Entradas Relacionadas
nov 2025
Interface Technology
Medición de temperatura altamente aislada en KEMA Labs
sept 2025
Interface Technology
Medición con seguridad funcional de altas tensiones en aplicaciones industriales
sept 2025
Interface Technology
Modernización de la infraestructura ferroviaria con transductores de alta tensión de Knick y sistemas DAQ de Dewesoft
jun 2025
Interface Technology
P45000 SIL 2 / SIL 3: Voltage measurements in applications with functional safety
sept 2024
Interface Technology