Sensor de oxígeno óptico SE340 | Digital | POM/Carcasa de acero inoxidable | Independiente del flujo
Número de producto:
SE340
Description
Sensor de oxígeno óptico SE340 | Digital | POM/Carcasa de acero inoxidable | Independiente del flujo
Sensor de oxígeno óptico digital para mediciones móviles de oxígeno disuelto
- Inmediatamente listo para su uso
- Independiente del caudal
- Bajo mantenimiento
- No requiere ningún electrolito
- Supervisión integrada de estado de la membrana
El sensor de oxígeno SE340 es un sensor óptico digital para mediciones móviles de oxígeno disuelto. Es robusto, impermeable (IP68), y, gracias a su principio de medición de desactivación fluorescente, está listo para su uso en todo momento. Se caracteriza por un rápido tiempo de respuesta y un rendimiento de medición independiente del caudal.
Aplicaciones
Aplicaciones químicas, control de calidad, alimentación y bebidas
¡Estaremos encantados de atenderle!
Contacto
| Cable: | cable fijo (longitud: 1,5 m/5,92 pies) |
|---|---|
| Conexión: | M12, 8 clavijas |
| Diametro del corpo: | 15,3 mm/0, 60 pulgadas |
| Forma de la membrana: | biselada |
| Longitud del cuerpo: | 125 mm/4,92 pulgadas |
| Material de la membrana: | silicona, polimetilmetacrilato (PMMA) |
| Material del cabezal enchufable: | POM |
| Material del cuerpo: | POM/acero inoxidable, 1.4571 |
| Parámetro de medición: | Oxígeno |
| Precisión: | ±0,2 K, ±1,5 % en agua con saturación de aire |
| Principio funcional: | Sensor con principio de medición óptica y transferencia de datos digitales |
| Profundidad de inmersión: | mín. 60 mm/2,36 pulgadas |
| Rango de medición de concentración: | 0 ... 20 mg/l a 25 °C/77 °F |
| Rango de medición de saturación: | 0 ... 200 % a 25 °C/77 °F |
| Rango de medición presión parcial: | 0 ... 400 mbar a 25 °C/77 °F |
| Rango de temperatura: | 0 … 50 °C (32 … 122 °F) |
| Sensor de temperatura: | NTC 30 kΩ |
Nuestros servicios
Productos relacionados
SE101N Sensor de pH | 112 mm | Cuerpo de polisulfona | Para análisis medioambientales y gestión del agua
Número de producto:
SE101N
Sensor de inserción de pH SE104-MS | Memosens | Cuerpo de plástico Noryl | Para muestras semisólidas y duras
Número de producto:
SE104-MS
Sensor de inserción de pH SE104N | Cuerpo de plástico Noryl | Para muestras semisólidas y duras
Número de producto:
SE104N
Sensor de oxígeno óptico SE340 | Digital | POM/Carcasa de acero inoxidable | Independiente del flujo
Número de producto:
SE340
Sensor de oxígeno SE715 | Memosens | 120 mm | Para el tratamiento de agua y aguas residuales
Número de producto:
SE715/1-MS
Sensor de pH SE102N | 110 mm | Cuerpo de vidrio | Para mediciones de precisión y aplicaciones químicas
Número de producto:
SE102N
Entradas de blog relevantes
sept 2024
Interface Technology
Stack and String Voltage Measurement in Electrolyzers and Fuel Cells
Voltage, current and temperature measurement in electrolyzers with P40000 series high voltage transducers
sept 2024
Interface Technology
Nuevas resistencias shunt de 30 mV para transductores de Knick
Knick amplía desde ya su oferta de accesorios para transductores de alta tensión con resistencias shunt con una caída de tensión de 30 mV
sept 2024
Interface Technology
Innovations at InnoTrans 2024 for rolling stock and DC traction power supply
At InnoTrans 2024 Knick presents electrical measurement solutions for rolling stock and DC traction power supply applications
dic 2023
Company
|Interface Technology
|Process Analytics
Knick Austria - direct customer contact in Austria from 2024
Reorganization of sales in Austria and new contacts in the field of process analytics and interface technology
may 2022
Interface Technology
Energy storage - the handshake between renewable energy and electric vehicles
Energy storage technology such as battery and hydrogen are critical for growth and continuous development of renewable energy and e-mobility.
feb 2022
Interface Technology
P52000VPD voltage presence detector reliably detects voltages up to 4200 V DC
The new P52000VPD voltage presence detector reliably monitors areas with high voltages and sends a signal to the downstream plant control system when a specified threshold value is reached.
sept 2021
Interface Technology
Knick Interface at Battery and Electric & Hybrid Vehicle Technology Expo
Knick will be showcasing high-voltage electrical measurement and signal conversion products.
may 2021
Interface Technology
Quadruple Standard Signals in Just One Signal Conditioner
The A20340 can output a standard input signal to four calibrated and galvanically isolated outputs in parallel.
abr 2021
Interface Technology
Electrical measurement and process analytics for hydrogen production
Knick products optimize hydrogen production in the process and in electrolyser operation.
mar 2021
Interface Technology
Condition Monitoring of High-Voltage Motors
Having an active predictive maintenance campaign in place for large rotating equipment can be a key strategy for maximizing process uptime.
mar 2021
Interface Technology
Pulse frequency conditioner for speed sensors
The new P16000 from Knick is a pulse frequency conditioner that converts frequency signals from speed sensors into standard signals.
nov 2020
Interface Technology
Worldwide smallest transducer up to ±2200 V
The P40000 series from Knick enables reliable voltage measurements from ±50 mV to ±3600 V and current measurements from ±100 mA to ±20 kA.
ago 2020
Interface Technology
Importance of broad-range power supplies for DC electrical measurement
Many DC electrical measurement products manufactured by Knick contain universal, also known as broad-range, power supplies.
jul 2020
Interface Technology
Measuring Photovoltaic Degradation
Photovoltaic (PV) array degradation is an important aspect to consider for system design and installation.
jun 2020
Interface Technology
Electrical Measurement Solutions: Control from 480 to 4800 Volts
Voltage and current transducers from Knick bring true control to electrical measurement applications across a wide-range of industries.
jun 2020
Interface Technology
Benefits of High Voltage Transducers versus Instrument Transformers
When a need arises to step voltage in a circuit either up or down for purposes of power transmission or distribution, there is no doubt that transformers are essential.
nov 2019
Interface Technology
Shunt Resistor versus Hall Effect Technology
There are many systems where measurement of large DC currents are needed for performance and safety.
mar 2018
Interface Technology
MTBF beyond 3000 years: A snap hook for your plant
Failure of equipment on the plant floor can lead to considerable and costly disruption.
ene 2018
Interface Technology
Knick Products Comply With UL - What Does That Mean?
There are different assessments and approaches to reach an adequate level of safety. Manufacturers are typically on the “safe” side, if they comply with recognized standards.
nov 2017
Interface Technology
High-voltage transducer offers more safety on railway vehicles
The requirements placed on railway vehicles have increased significantly in recent years. Products for rolling stock need to ensure a higher level of functional safety than ever before.
feb 2017
Interface Technology
True RMS Measurement with P41000TRMS
Traditional millivolt AC transducers are very susceptible to errors due to their poor insulation and are only designed for pure sinewave measurement.
feb 2017
Interface Technology
Functional safety and maximum availability can go together
The requirements on operational and safety-related circuits are continuously growing.