Skip to main content

核电领域:Knick – 50 余年来值得信赖的合作伙伴

核电站持续稳定输出能源,在实现气候目标进程中具备重要战略价值。在核能讨论中,设施安全性始终是核心议题。核电站的安全性能主要取决于其安全相关仪控系统(简称 I&C 系统),而系统中采用的隔离放大器与变送器必须具备高精度、长期稳定性和卓越的可靠性。数十年来,Knick 始终为核设施提供符合国际公认安全标准认证的解决方案。

安全至上

在核电站运营中,安全始终是首要考量,材料疲劳甚至人为失误等潜在风险一旦发生,都可能对人员与环境造成严重后果。为确保及时识别风险并采取针对性措施,核电站配备了安全相关仪控系统。这些系统持续监测关键设备参数,因为即便最微小的偏差都可能预示着故障隐患。因此,必须精确采集测量值并将其可靠地传输至安全系统,即使在极端环境条件下也不例外。这要求采用能够保障高功能安全性的认证测量解决方案。

50 年来,Knick 提供的变送器和隔离放大器始终满足核电站运营商对监测系统的高标准要求。Knick 产品的卓越品质和高度可靠性源于严格遵照 ISO 9001 质量管理体系标准,以及 KTA 1401 和 ISO 19443 规定的其他质量管理体系要求。这些认证体系的贯彻实施,充分体现了我们对安全相关测量设备在制造安全性与精确性方面的极致追求。

ausgeblendet

安全控制系统电气隔离

反应堆温度测量

应急发电机组监测

Sector 4

为何选择 Knick?
50 余年来,Knick 一直在为核设施提供安全可靠的变送器和隔离放大器。除温度变送器外,我们的产品系列还包括标准/通用隔离放大器、信号倍增器以及交流/直流变送器,所有产品均通过 KTA 3503 或 KTA 3505 型式试验认证,获准用于核电站中的安全相关仪控系统。Knick 遵照 ISO 9001 质量管理体系,并按照 KTA 1401 和 ISO 19443 标准将其用于核能应用。

应用亮点:适用于核电站的认证测量解决方案和信号倍增器

温度监测对于核电站的效率和安全起着至关重要的作用。Knick 的认证测量解决方案能够准确地采集和处理温度数据,因此能够在早期阶段识别和预防危险性运行状态。此外,由于 Knick 温度变送器能够连接至所有常见的热电偶和电阻温度计,可在设施内灵活使用。

信号倍增器可实现多路安全系统间的电气隔离信号传输,杜绝信号串扰风险。Knick 解决方案完全符合国际安全标准的严苛要求,实现无失真、无干扰的信号传输。

H2 [Ind] Video Title

Absatz [Ind] Short description of the video

Ausgeblendet

H4 Brochure

Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua.

Download Now

Ausgeblendet

相关应用

您有疑问吗?我们竭诚为您服务。
联系我们

接口技术领域的最新博客文章

Interface Technology

Stack and String Voltage Measurement in Electrolyzers and Fuel Cells

Voltage, current and temperature measurement in electrolyzers with P40000 series high voltage transducers

适用于 Knick 变送器的新型 30 mV 分流电阻

Knick 从现在起为其高压变送器的附件产品系列增添具有 30 mV 电压降的分流电阻
Innovations at InnoTrans 2024

Innovations at InnoTrans 2024 for rolling stock and DC traction power supply

At InnoTrans 2024 Knick presents electrical measurement solutions for rolling stock and DC traction power supply applications

Knick Austria - direct customer contact in Austria from 2024

Reorganization of sales in Austria and new contacts in the field of process analytics and interface technology

Energy storage - the handshake between renewable energy and electric vehicles

Energy storage technology such as battery and hydrogen are critical for growth and continuous development of renewable energy and e-mobility.

P52000VPD 电压检测器能够可靠检测高达 4200 V 的直流电压

新型电压检测器 P52000VPD (Voltage Presence Detection) 能够可靠监控高压应用领域,在达到指定阈值时向下游设备控制器发送信号。

Knick Interface at Battery and Electric & Hybrid Vehicle Technology Expo

Knick will be showcasing high-voltage electrical measurement and signal conversion products.

VariTrans A20340 – 仅需一个隔离放大器的标准信号倍增

The A20340 can output a standard input signal to four calibrated and galvanically isolated outputs in parallel.

Electrical measurement and process analytics for hydrogen production

Knick products optimize hydrogen production in the process and in electrolyser operation.

Condition Monitoring of High-Voltage Motors

Having an active predictive maintenance campaign in place for large rotating equipment can be a key strategy for maximizing process uptime.

Pulse frequency conditioner for speed sensors

The new P16000 from Knick is a pulse frequency conditioner that converts frequency signals from speed sensors into standard signals.

全球最小传感器,高达±2200 V

Knick的VariTrans P 40000系列能对从±50 mV到±3600 V的电压,以及从±100 mA到±20 kA的电流进行可靠测量。经过验证的ProLine系列现在已经扩展到包含传感器P42000D2,它安装在Din导轨上,模块设计紧凑,测量高达2200 V的直流电压。

宽范围电源对于直流电气测量的重要性

Knick生产的众多直流电气测量产品都包含通用的,也称为宽范围电源。这意味着它们将工作在一个相对较宽的电压范围窗口内,如20…253V,交流或直流。

Measuring Photovoltaic Degradation

Photovoltaic (PV) array degradation is an important aspect to consider for system design and installation.

Electrical Measurement Solutions: Control from 480 to 4800 Volts

Voltage and current transducers from Knick bring true control to electrical measurement applications across a wide-range of industries.

Benefits of High Voltage Transducers versus Instrument Transformers

When a need arises to step voltage in a circuit either up or down for purposes of power transmission or distribution, there is no doubt that transformers are essential.

分流器和霍尔效应的技术对比

在许多系统中,为了确保性能和安全,需要测量较大的直流电流。两个例子是静态励磁和轨道牵引动力。这些电流的测量通常采用两种主要原理之一:配有mV级变送器的分流器电阻或霍尔效应传感器来反馈。

MTBF beyond 3000 years: A snap hook for your plant

Failure of equipment on the plant floor can lead to considerable and costly disruption.

Knick Products Comply With UL - What Does That Mean?

There are different assessments and approaches to reach an adequate level of safety. Manufacturers are typically on the “safe” side, if they comply with recognized standards.

High-voltage transducer offers more safety on railway vehicles

The requirements placed on railway vehicles have increased significantly in recent years. Products for rolling stock need to ensure a higher level of functional safety than ever before.

True RMS Measurement with P41000TRMS

Traditional millivolt AC transducers are very susceptible to errors due to their poor insulation and are only designed for pure sinewave measurement.

Functional safety and maximum availability can go together

The requirements on operational and safety-related circuits are continuously growing.