Skip to main content

P43000 TRMS AC/DC High Voltage Transducer | Input up to ±5 A | True RMS measurement

Description

P43000 TRMS AC/DC High Voltage Transducer | Input up to ±5 A | True RMS measurement
  • Universal usability:
    • AC input 100 mA~ to 5 A~
    • DC output 0 (4) … 20 mA, 0 … 10 V
  • Working voltages up to 3600 V AC/DC
  • TransShield technology
    allows for extremely compact modular housing
  • Protection against electric shock 
    through protective separation up to 1800 V AC /DC according to EN 61140
  • Test voltages up to 15 kV AC
  • Outstanding transmission properties:
    • Gain error < 0.5 % with crest factor < 3
    • Gain error < 1 % with crest factor 3 … 5
    • Response time T90
  • Virtually no influence from common-mode voltages:
    CMRR approx. 150 dB
  • Tremendous flexibility thanks to:
    • calibrated switching of up to 16 input/output ranges
    • up to 16 customer-specific ranges
    • VariPower broad-range power supply 20 V to 253 V AC/DC
  • Reliable function even with unstable supply
  • No damage
    in the case of erroneous power connection
  • Switchable models
    reduce variety of versions, thus saving storage costs
  • Robust
    thanks to vacuum encapsulation
  • Mechanically stable
    for operation on ships, trains and vehicles
  • 5-year warranty

The P43000 TRMS isolation amplifiers have been specially conceived for measurements of bipolar currents ranging from milliamps up to 5 amps. They reliably isolate high potentials at the input circuit. Thanks to the true rms conversion in the transducer, even distorted input signals are captured correctly and output as so-called true rms values.


The isolating distances are designed to withstand permanent voltages up to 3600 V AC/DC and fast transients up to 20 kV.

我们期待您的来信
联系我们

技术细节

AC/DC 电位隔离: 最高 3,600 V
工作环境 温度: –10 ... 70 °C, –40 ... 75/85 °C
功能: True-RMS of AC currents
输入: 0 ... 5 A AC, 0 ... 100 mA AC
输出: 0 ... (±)10 V, 0 ... (±)20 mA, 4 ... 20 mA, 峰值或 TRMS 值
最小测试电压: 10/15 kV AC
电源: 22 ... 230 V AC/DC
截止频率: 截止频率 5 kHz,可按要求提供更低的截止频率
尺寸(宽 x 长 x 高): 45 x 90 x 118 mm (D2)
特点: 可切换或定制规格, 基于现场数据,平均无故障时间 MTBF 长达 2,165 年
产品类别: 高压隔离放大器

下载

操作说明书

[17399] 操作说明书
P43000 TRMS
Version 06

数据手册

[1615] 数据表
P43000 TRMS
产品描述 | 规格 | 产品范围

证书

[14140] Quality Report (MTBF)
Document No. TX180416A
Failure Rate of Series P40000
[11463] EU Declaration of Conformity (DE, EN, FR)
Series VariTrans P4x000 (D*-nnnn/D*AG-nnnn/D*TRMS-nnnn)
No. EU221209A | 2023-11-29
[12429] EU Declaration of Conformity (DE, EN, FR)
P4*000 KTA
No. EU230522A | 2023-12-12

我们的服务

在工艺或应用中使用

相关产品

相关的博客文章

Stack and String Voltage Measurement in Electrolyzers and Fuel Cells

Voltage, current and temperature measurement in electrolyzers with P40000 series high voltage transducers

适用于 Knick 变送器的新型 30 mV 分流电阻

Knick 从现在起为其高压变送器的附件产品系列增添具有 30 mV 电压降的分流电阻
Innovations at InnoTrans 2024

Innovations at InnoTrans 2024 for rolling stock and DC traction power supply

At InnoTrans 2024 Knick presents electrical measurement solutions for rolling stock and DC traction power supply applications

Knick Austria - direct customer contact in Austria from 2024

Reorganization of sales in Austria and new contacts in the field of process analytics and interface technology

Energy storage - the handshake between renewable energy and electric vehicles

Energy storage technology such as battery and hydrogen are critical for growth and continuous development of renewable energy and e-mobility.

P52000VPD 电压检测器能够可靠检测高达 4200 V 的直流电压

新型电压检测器 P52000VPD (Voltage Presence Detection) 能够可靠监控高压应用领域,在达到指定阈值时向下游设备控制器发送信号。

Knick Interface at Battery and Electric & Hybrid Vehicle Technology Expo

Knick will be showcasing high-voltage electrical measurement and signal conversion products.

VariTrans A20340 – 仅需一个隔离放大器的标准信号倍增

The A20340 can output a standard input signal to four calibrated and galvanically isolated outputs in parallel.

Electrical measurement and process analytics for hydrogen production

Knick products optimize hydrogen production in the process and in electrolyser operation.

Condition Monitoring of High-Voltage Motors

Having an active predictive maintenance campaign in place for large rotating equipment can be a key strategy for maximizing process uptime.

Pulse frequency conditioner for speed sensors

The new P16000 from Knick is a pulse frequency conditioner that converts frequency signals from speed sensors into standard signals.

全球最小传感器,高达±2200 V

Knick的VariTrans P 40000系列能对从±50 mV到±3600 V的电压,以及从±100 mA到±20 kA的电流进行可靠测量。经过验证的ProLine系列现在已经扩展到包含传感器P42000D2,它安装在Din导轨上,模块设计紧凑,测量高达2200 V的直流电压。

宽范围电源对于直流电气测量的重要性

Knick生产的众多直流电气测量产品都包含通用的,也称为宽范围电源。这意味着它们将工作在一个相对较宽的电压范围窗口内,如20…253V,交流或直流。

Measuring Photovoltaic Degradation

Photovoltaic (PV) array degradation is an important aspect to consider for system design and installation.

Electrical Measurement Solutions: Control from 480 to 4800 Volts

Voltage and current transducers from Knick bring true control to electrical measurement applications across a wide-range of industries.

Benefits of High Voltage Transducers versus Instrument Transformers

When a need arises to step voltage in a circuit either up or down for purposes of power transmission or distribution, there is no doubt that transformers are essential.

分流器和霍尔效应的技术对比

在许多系统中,为了确保性能和安全,需要测量较大的直流电流。两个例子是静态励磁和轨道牵引动力。这些电流的测量通常采用两种主要原理之一:配有mV级变送器的分流器电阻或霍尔效应传感器来反馈。

MTBF beyond 3000 years: A snap hook for your plant

Failure of equipment on the plant floor can lead to considerable and costly disruption.

Knick Products Comply With UL - What Does That Mean?

There are different assessments and approaches to reach an adequate level of safety. Manufacturers are typically on the “safe” side, if they comply with recognized standards.

High-voltage transducer offers more safety on railway vehicles

The requirements placed on railway vehicles have increased significantly in recent years. Products for rolling stock need to ensure a higher level of functional safety than ever before.

True RMS Measurement with P41000TRMS

Traditional millivolt AC transducers are very susceptible to errors due to their poor insulation and are only designed for pure sinewave measurement.

Functional safety and maximum availability can go together

The requirements on operational and safety-related circuits are continuously growing.