ANALYSE DES PROCESSUS

Mesures du pH lors de la synthèse de colorants azoïques

pH measurement during dye synthesis of azo dyes with Knick’s Ceramat fitting

Azo dyes make up the largest group of synthetic dyes by number. They are used as food dyes, artists’ colors, basic colors for four-color printing (yellow and magenta), as well as textile dyes on a large scale. More than 350,000 tons of azo dyes are used worldwide for the dyeing of natural fibers.

Chimie

Keyfacts Application

Sector

Azo dye production 24/7

Application

cCare - fully automated sensor maintenance for dye syntheses in which virtually all essential reaction steps are pH-dependent, so that optimization of the of the product yield based on a reliable and low-maintenance pH measurement.

Measured Parameter

pH

Key Requirements

The extreme conditions for the measuring point are as follows:

pH = 1, hydrochloric
Temperature = 90°C,
Pressure = 6 bars.
The pH electrodes have a service life of 8 h up to several weeks.

Measurement requirements

Dye syntheses in modern plants run around the clock in four shifts. Virtually all essential reaction steps are pH-dependent so that the optimization of product yield is based on a reliable, low-maintenance pH measurement. The diazotation reaction requires much hydrochloric acid and is therefore correspondingly corrosive. The reactors are protected by an enamel coating, the coupling reactors also by a rubber coating.

The extreme conditions for the measuring point are as follows:

pH = 1
Temperature = 90 °C
Pressure = 6 bar.

The pH electrodes have a service life of eight hours up to several weeks. Automation of these measuring points with conventional retractable fittings is only possible when Hastelloy C4 is used. Nevertheless, these expensive fittings require high maintenance effort. The fitting must be removed and serviced several times a year.

Solution

The Ceramat WA150 retractable fitting together with the Unical 9000 automatic cleaning and calibration system allows complete automation of this difficult measuring point with maximum availability. The Ceramat fitting consists of a corrosion-proof, ultrahard, superpolished, rotating ceramic part and a corrosion-resistant, carbon-reinforced, non-moved plastic housing made of PEEK.

Why Knick?
After 24 months run time the Ceramat does not show any wear on seals, probe housing, or other parts.

Produits correspondants

WA150 Ceramat Retractable Fitting | Ceramic lock-gate sealing | Pneumatic | Carbon-fiber-reinforced PVDF or PEEK

Réf. produit :

WA150

Industries et applications connexes

Chimie

L’industrie chimique est caractérisée par une très grande diversité d’applications, qui incluent souvent des zones toxiques et à risque d’explosion.

Production de cellulose et de papier

Many measuring points in pulp production are positioned in environments where the presence of technical personnel must be restricted to a minimum. Due to the aggressive process media with high solids...

Détection de rupture des échangeurs de chaleur

La vapeur refroidie dans la partie inférieure se dépose sous la forme d’eau de condensation qui présente une grande pureté et donc une conductivité très faible. Sachant qu’une conductivité élevée est le signe d’impuretés, la mesure de la conductivité du condensat est une méthode...

Surveillance des tours de refroidissement

Cooling towers are used in a range of industrial sectors for diverting process heat from cooling circuits. Mineral deposits and corrosion reduce efficiency and lead to the premature wear of system components…

Chemical Industry Brochure

Overview of specific applications and product solutions in various fields of industrial chemistry.

Download now

Articles de blog sur ce sujet

févr. 2024

Process Analytics

Uniclean700, Launch

Uniclean 700 Series - Modular control system for automated sensor cleaning

With the Uniclean 700 series, Knick is introducing a modular control system, that can be installed very quickly and cost-effectively as a flexible entry-level solution for automated sensor cleaning.

déc. 2023

Company

|

Interface Technology

|

Process Analytics

Knick Austria - direct customer contact in Austria from 2024

Reorganization of sales in Austria and new contacts in the field of process analytics and interface technology

avr. 2023

Process Analytics

Launch, Fitting, WA111

Robust WA111 Retractable Fitting Made of Plastic for Highly Corrosive Operating Conditions

The plastic WA111 retractable fitting is a robust and cost-effective solution for corrosive processes and environments. It is equipped with a secure lock function and multiple nozzles for thorough sensor cleaning.

avr. 2023

Process Analytics

Launch, Fitting, WA155

Coopération réussie : Knick a développé un support rétractable spécial Ceramat WA 155 pour les sondes optiques de SOPAT.

Nettoyage automatique des sondes optiques dans les processus d'encrassement : Un projet commun de Knick et SOPAT pour une application client avec Ceramat.

avr. 2023

Process Analytics

Conductivity, Phamacy, pH

pH and conductivity measurement in vaccine production

Pharmaceutical contract manufacturer relies on Knick's transmitters for modular production plants for Covid-19 vaccines.

avr. 2023

Process Analytics

Conductivity, Sensor, SE625

Sturdy 2-Electrodes Conductivity Sensor SE625 with Coaxial Electrodes made of Titanium

The SE625 ensures reliable and accurate determination of the conductivity of ultrapure water in the semiconductor industry.

janv. 2023

Process Analytics

ARD75

Sensor Adapter with Lock Function Enables Safe and Thorough Cleaning

Sensor adapter with locking gate for safety and thorough cleaning of sensors in the immersion fitting ARD75 without the need

nov. 2022

Process Analytics

Protos II 4400, Module

Up to six Sensors on one Transmitter Protos II 4400 via Modul MSU4400-180

Users can now connect up to six Memosens sensors simultaneously.

août 2022

Process Analytics

Achema, Exhibition

ACHEMA 2022 - Knick at the world forum for the process industry

In August 2022, the international process industry met at the ACHEMA. Knick presented the cCare system and industrial applications in a new concept.

juin 2022

Process Analytics

pH, Sensor, SE555, ORP

Combined pH- and ORP-Sensor SE555X/*-AMSN

Combined pH and ORP measurement in one sensor SE555 saves place and equipment costs for demanding requirements in the chemical industry, the food sector and for hygienic applications.

avr. 2022

Process Analytics

MemoTrans

MemoTrans MT201N: Transmetteur ultracompact pour sondes Memosens

Le transmetteur ultracompact MemoTrans MT201 s'enfiche directement sur la sonde Memosens dans le support et communique via le protocole HART 4-20 mA.

févr. 2022

Process Analytics

Stratos Multi, Transmitter

Nouveau transmetteur Stratos Multi E461N avec Profinet

L'interface Profinet du nouveau transmetteur multiparamètres Stratos Multi E461N permet une communication continue des paramètres de process et une maintenance prédictive, du niveau du terrain jusqu'aux systèmes de contrôle des process usuels.

févr. 2022

Process Analytics

Protos II 4400, Stratos Multi, Software, ProgaLog

Programmation hors ligne confortable des transmetteurs sur PC: ProgaLog 4000

Avec ProgaLog 4000, vous pouvez facilement paramétrer hors ligne tous les transmetteurs à configuration modulaire Stratos Multi et Protos II 4400, enregistrer les réglages, les dupliquer pour d'autres transmetteurs et les documenter pour des audits.

janv. 2022

Process Analytics

Memosens

Memosens 2.0: Evolution of digital data transfer

As one of the two initiators of Memosens, Knick is constantly developing the technology.

nov. 2021

Process Analytics

Conductivity, Sensor, Ex, SE656, SE655

SE655X numérique et SE656X numérique – Sondes de conductivité numériques avec certification Ex

SE655X numérique et SE656X numérique avec rapport Memosens sont disponibles avec une certification Ex. Elles sont particulièrement adaptées à l’industrie chimique, du papier et de la cellulose ainsi qu'à la surveillance des eaux usées industrielles.

nov. 2021

Process Analytics

Exhibition, Switzerland, Ilmac

ILMAC 2021 in Basel - Trade Show Review by Knick Schweiz AG

Knick Schweiz AG exhibited at ILMAC in Basel and gives a brief review of what it's like to have finally met customers at the show again.

oct. 2021

Process Analytics

Stratos Multi, Transmitter, Ex

Stratos Multi E401X- Transmetteur multiparamètres pour zones Ex

Le nouveau Stratos Multi peut désormais être utilisé dans les zones Ex.

mai 2021

Process Analytics

Transmitters, Stratos Multi

Optimisation des process avec Stratos Multi E471 par EtherNet/IP

EtherNet/IP communication protocol allows the transmitter to be easily integrated into Industrial Ethernet networks as PCS.

mai 2021

Process Analytics

Launch, Conductivity, Sensor, SE656

Nouvelle sonde de conductivité numérique SE656N

New toroidal Digital Conductivity Sensor with a large measuring range and consisting of PFA for using in aggressive media

mars 2021

Process Analytics

Protos II 4400, Profinet

Transmetteur pour l'industrie de process avec le module PROFINET

Le standard Ethernet industriel PROFINET joue un rôle de plus en plus déterminant pour les techniques de process dans le contexte de l'industrie 4.0.

juil. 2020

Process Analytics

Launch, Fitting, ARD170

Canne d’immersion haute qualité pour applications mobiles

Avec l’ARD 170, Knick propose une canne d’immersion haute qualité pour mesures mobiles du pH, de la conductivité et de l’oxygène dissous. Les développeurs ont accordé une attention particulière à la simplicité et la flexibilité d’utilisation.

juil. 2020

Process Analytics

Fitting, ARD50, ARD75

Canne d'immersion modulaire en version électriquement conductrice

Avec ses cannes d'immersion ARD 50 EL et ARD 75 EL, Knick complète de deux versions électriquement conductrices (EL) son portefeuille de cannes d’analyse de liquides. Les modulaires permettent l’utilisation de sondes spécifiques aux applications.

avr. 2020

Process Analytics

Launch, Transmitters, Stratos Multi

New multiparameter transmitter Stratos Multi

Knick is launching the the next generation in its Stratos analyzer product line.

févr. 2018

Process Analytics

Fitting, Sensor

How to get the sensor into the process

Sensors as the direct interface to the process must be exactly matched to the chemistry of the measured medium and to the prevailing pressure and temperature conditions.

avr. 2017

Process Analytics

MemoRail Modbus

Powerful compact analyzer boosts performance while reducing costs

It has long been common practice when taking pH/ORP, conductivity, and oxygen measurements that a fixed analyzer be mounted near the sensor. The analyzer serves several purposes.