Saltar al contenido principal Saltar a la búsqueda Saltar a la navegación principal

41 Acondicionador de señal estándar sin energía auxiliar | Alta precisión

Description

41 Acondicionador de señal estándar sin energía auxiliar | Alta precisión

Para la separación de señales de corriente estándar 0(4) a 20 mA, hasta 3 canales.

  • Sin alimentación 
    no hay interferencias de red
  • Precisión extremadamente alta
  • Amplio campo de aplicación 
    transmisión de corriente de 2 µA a 50 mA
  • Máxima fiabilidad 
    sin calentamiento innecesario y, por lo tanto, máxima vida útil de los elementos constructivo
  • Carga despreciable de la señal de medición 
    necesidad de tensión residual de solo 1,2 V
  • Sin apenas retardo de la señal
  • Ahorra espacio con variantes multicanal
    armario modular con hasta 3 canales
  • Los procedimientos de prueba controlados por ordenador garantizan la calidad
  • 5 años de garantía

El 41 A2 con separación galvánica basada en transformadores ofrece características que ningún otro aislador autoalimentado de CC ha llegado a alcanzar. Adecuado para el aislamiento galvánico de señales de 0/4 a 20 mA. La clase de error del 0,2 % y solo 1,2 V de necesidad de tensión residual permiten un uso amplio de este aislador.

El armario modular A2 de 22,5 mm de ancho para máx. 3 aisladores aprovecha de forma óptima el espacio en caso de funcionamiento multicanal. Su estructura totalmente moldeada garantiza la máxima fiabilidad bajo condiciones extremas.

¡Estaremos encantados de atenderle!
Contacto

Ficha técnica

Función: Transmisión/aislamiento de señales estándar
Categoría de producto: Aislador universal / Aislador de señales normalizadas

Descargas

Prospectos

[14160] Folleto
Vista general del producto Tecnología de interface

Fichas técnicas

[824] Data Sheet
IsoTrans 41
Product Description | Specifications | Product Range

Software

[11876] Knick Produktmakros (.pdf)
ePLAN Electric P8
[12154] Software (.zip)
ePLAN P8 Produktmakros

Nuestros servicios

Utilizados en procesos o aplicaciones

Transductores de alta tensión y transductores para el registro y la conversión de señales de corriente, tensión, temperatura, revoluciones, dilatación y resistencia.

Relevante Blogbeiträge

Stack and String Voltage Measurement in Electrolyzers and Fuel Cells

Voltage, current and temperature measurement in electrolyzers with P40000 series high voltage transducers

Nuevas resistencias shunt de 30 mV para transductores de Knick

Knick amplía desde ya su oferta de accesorios para transductores de alta tensión con resistencias shunt con una caída de tensión de 30 mV
Innovations at InnoTrans 2024

Innovations at InnoTrans 2024 for rolling stock and DC traction power supply

At InnoTrans 2024 Knick presents electrical measurement solutions for rolling stock and DC traction power supply applications

Knick Austria - direct customer contact in Austria from 2024

Reorganization of sales in Austria and new contacts in the field of process analytics and interface technology

Energy storage - the handshake between renewable energy and electric vehicles

Energy storage technology such as battery and hydrogen are critical for growth and continuous development of renewable energy and e-mobility.

P52000VPD voltage presence detector reliably detects voltages up to 4200 V DC

The new P52000VPD voltage presence detector reliably monitors areas with high voltages and sends a signal to the downstream plant control system when a specified threshold value is reached.

Knick Interface at Battery and Electric & Hybrid Vehicle Technology Expo

Knick will be showcasing high-voltage electrical measurement and signal conversion products.

Quadruple Standard Signals in Just One Signal Conditioner

The A20340 can output a standard input signal to four calibrated and galvanically isolated outputs in parallel.

Electrical measurement and process analytics for hydrogen production

Knick products optimize hydrogen production in the process and in electrolyser operation.

Condition Monitoring of High-Voltage Motors

Having an active predictive maintenance campaign in place for large rotating equipment can be a key strategy for maximizing process uptime.

Pulse frequency conditioner for speed sensors

The new P16000 from Knick is a pulse frequency conditioner that converts frequency signals from speed sensors into standard signals.

Worldwide smallest transducer up to ±2200 V

The P40000 series from Knick enables reliable voltage measurements from ±50 mV to ±3600 V and current measurements from ±100 mA to ±20 kA.

Importance of broad-range power supplies for DC electrical measurement

Many DC electrical measurement products manufactured by Knick contain universal, also known as broad-range, power supplies.

Measuring Photovoltaic Degradation

Photovoltaic (PV) array degradation is an important aspect to consider for system design and installation.

Electrical Measurement Solutions: Control from 480 to 4800 Volts

Voltage and current transducers from Knick bring true control to electrical measurement applications across a wide-range of industries.

Benefits of High Voltage Transducers versus Instrument Transformers

When a need arises to step voltage in a circuit either up or down for purposes of power transmission or distribution, there is no doubt that transformers are essential.

Shunt Resistor versus Hall Effect Technology

There are many systems where measurement of large DC currents are needed for performance and safety.

MTBF beyond 3000 years: A snap hook for your plant

Failure of equipment on the plant floor can lead to considerable and costly disruption.

Knick Products Comply With UL - What Does That Mean?

There are different assessments and approaches to reach an adequate level of safety. Manufacturers are typically on the “safe” side, if they comply with recognized standards.

High-voltage transducer offers more safety on railway vehicles

The requirements placed on railway vehicles have increased significantly in recent years. Products for rolling stock need to ensure a higher level of functional safety than ever before.

True RMS Measurement with P41000TRMS

Traditional millivolt AC transducers are very susceptible to errors due to their poor insulation and are only designed for pure sinewave measurement.

Functional safety and maximum availability can go together

The requirements on operational and safety-related circuits are continuously growing.