Sensor de Redox SE565 | Memosens | 120 mm | Ex | Para procesos higiénicos y aplicaciones estériles
Número de producto:
SE565X/1-NMSN
Description
Sensor de Redox SE565 | Memosens | 120 mm | Ex | Para procesos higiénicos y aplicaciones estériles
Sensor de Redox para procesos higiénicos y aplicaciones estériles.
- Aislamiento galvánico perfecto mediante la tecnología Memosens
- La humedad no afecta a la conexión enchufable
- Transmisión de datos digital
- Diagnóstico de los sensores integrado
- Electrolito en gel moderno
- Sensor de temperatura integrado
- Diafragma de cerámica
- Para aplicaciones higiénicas y estériles
- Para medios muy sucios
- Para medios que contienen sulfuros
- Para medios que contienen proteínas
- Apto para procesos que contienen disolventes
Los sensores de Redox SE565 no requieren mantenimiento. El sistema de referencia presurizado con electrolito en gel está conectado con el medio de medición a través de un diafragma de cerámica. El electrodo de medición está elaborado de platino.
Los sensores SE565 están diseñados para la medición simultánea del valor Redox y la temperatura en procesos industriales.
Son ideales para la esterilización con vapor y tienen un sistema de referencia que se ha desarrollado para el uso en alimentos y productos farmacéuticos.
Aplicaciones
Aplicaciones higiénicas y estériles, industria alimentaria y farmacéutica, biotecnología
¡Estaremos encantados de atenderle!
Contacto
| Conexión de proceso: | PG 13,5 |
|---|---|
| Diafragma: | Cerámica (1 x) |
| Material of measuring electrode: | Platinum |
| Parámetro de medición: | Redox |
| Presión relativa: | -1 … 6 bar |
| Sensor de temperatura: | NTC 30 kΩ |
| Sistema de referencia: | Ag/AgCl, electrolito de gel con almohadilla de presión |
| Temperatura: | 0 … 135 °C |
| Longitud: | 120 mm |
| Conector: | Memosens |
| Rango de medición : | ± 1500 mV |
| Protección contra explosiones: | Sí |
Descargas
Manuals
Prospectos
Fichas técnicas
Certificados
Nuestros servicios
Utilizados en procesos o aplicaciones
Productos relacionados
Omitir la galería de productos
Sensor de pH/Redox SE554 | Memosens | 120 mm | Ex | Para medios con una resistencia iónica muy elevada
Número de producto:
SE554X/1-AMSN
Sensor de pH/Redox SE554 | Memosens | 225 mm | Ex | Para medios con una resistencia iónica muy elevada
Número de producto:
SE554X/2-AMSN
Sensor de pH/Redox SE555 | Memosens | 120 mm | Ex | Apto para CIP/SIP | Esterilizable | Para medios agresivos
Número de producto:
SE555X/1-AMSN
Sensor de pH/Redox SE555 | Memosens | 225 mm | Ex | Apto para CIP/SIP | Esterilizable | Para medios agresivos
Número de producto:
SE555X/2-AMSN
Sensor de Redox SE564 | Memosens | 325 mm | Ex | Para medios muy cargados con variaciones de presión
Número de producto:
SE564X/3-NMSN
Sensor de Redox SE565 | Memosens | 120 mm | Ex | Para procesos higiénicos y aplicaciones estériles
Número de producto:
SE565X/1-NMSN
Sensor de Redox SE565 | Memosens | 225 mm | Ex | Para procesos higiénicos y aplicaciones estériles
Número de producto:
SE565X/2-NMSN
Entradas de blog relevantes
sept 2024
Interface Technology
Stack and String Voltage Measurement in Electrolyzers and Fuel Cells
Voltage, current and temperature measurement in electrolyzers with P40000 series high voltage transducers
sept 2024
Interface Technology
Nuevas resistencias shunt de 30 mV para transductores de Knick
Knick amplía desde ya su oferta de accesorios para transductores de alta tensión con resistencias shunt con una caída de tensión de 30 mV
sept 2024
Interface Technology
Innovations at InnoTrans 2024 for rolling stock and DC traction power supply
At InnoTrans 2024 Knick presents electrical measurement solutions for rolling stock and DC traction power supply applications
dic 2023
Company
|Interface Technology
|Process Analytics
Knick Austria - direct customer contact in Austria from 2024
Reorganization of sales in Austria and new contacts in the field of process analytics and interface technology
may 2022
Interface Technology
Energy storage - the handshake between renewable energy and electric vehicles
Energy storage technology such as battery and hydrogen are critical for growth and continuous development of renewable energy and e-mobility.
feb 2022
Interface Technology
P52000VPD voltage presence detector reliably detects voltages up to 4200 V DC
The new P52000VPD voltage presence detector reliably monitors areas with high voltages and sends a signal to the downstream plant control system when a specified threshold value is reached.
sept 2021
Interface Technology
Knick Interface at Battery and Electric & Hybrid Vehicle Technology Expo
Knick will be showcasing high-voltage electrical measurement and signal conversion products.
may 2021
Interface Technology
Quadruple Standard Signals in Just One Signal Conditioner
The A20340 can output a standard input signal to four calibrated and galvanically isolated outputs in parallel.
abr 2021
Interface Technology
Electrical measurement and process analytics for hydrogen production
Knick products optimize hydrogen production in the process and in electrolyser operation.
mar 2021
Interface Technology
Condition Monitoring of High-Voltage Motors
Having an active predictive maintenance campaign in place for large rotating equipment can be a key strategy for maximizing process uptime.
mar 2021
Interface Technology
Pulse frequency conditioner for speed sensors
The new P16000 from Knick is a pulse frequency conditioner that converts frequency signals from speed sensors into standard signals.
nov 2020
Interface Technology
Worldwide smallest transducer up to ±2200 V
The P40000 series from Knick enables reliable voltage measurements from ±50 mV to ±3600 V and current measurements from ±100 mA to ±20 kA.
ago 2020
Interface Technology
Importance of broad-range power supplies for DC electrical measurement
Many DC electrical measurement products manufactured by Knick contain universal, also known as broad-range, power supplies.
jul 2020
Interface Technology
Measuring Photovoltaic Degradation
Photovoltaic (PV) array degradation is an important aspect to consider for system design and installation.
jun 2020
Interface Technology
Electrical Measurement Solutions: Control from 480 to 4800 Volts
Voltage and current transducers from Knick bring true control to electrical measurement applications across a wide-range of industries.
jun 2020
Interface Technology
Benefits of High Voltage Transducers versus Instrument Transformers
When a need arises to step voltage in a circuit either up or down for purposes of power transmission or distribution, there is no doubt that transformers are essential.
nov 2019
Interface Technology
Shunt Resistor versus Hall Effect Technology
There are many systems where measurement of large DC currents are needed for performance and safety.
mar 2018
Interface Technology
MTBF beyond 3000 years: A snap hook for your plant
Failure of equipment on the plant floor can lead to considerable and costly disruption.
ene 2018
Interface Technology
Knick Products Comply With UL - What Does That Mean?
There are different assessments and approaches to reach an adequate level of safety. Manufacturers are typically on the “safe” side, if they comply with recognized standards.
nov 2017
Interface Technology
High-voltage transducer offers more safety on railway vehicles
The requirements placed on railway vehicles have increased significantly in recent years. Products for rolling stock need to ensure a higher level of functional safety than ever before.
feb 2017
Interface Technology
True RMS Measurement with P41000TRMS
Traditional millivolt AC transducers are very susceptible to errors due to their poor insulation and are only designed for pure sinewave measurement.
feb 2017
Interface Technology
Functional safety and maximum availability can go together
The requirements on operational and safety-related circuits are continuously growing.