Skip to main content

P22400 Isolated Standard Signal Conditioner | Input 0(4) … 20 mA | For safety circuits up to SIL3

Description

P22400 Isolated Standard Signal Conditioner | Input 0(4) … 20 mA | For safety circuits up to SIL3

Functional safety and maximum availability can go together 

  • Functional safety up to SIL 3
    acc. to EN 61508 with certificate from an accredited testing body
  • Average failure rate
    MTBF: 965 years
  • Low transmission error
    0.08 % full scale
  • High isolation including protec-tion against electric shock
    by reinforced insulation up to 600 V AC/DC
  • Test voltage 5.4 kV AC
  • Minimal losses and low installation effort 
    thanks to loop-powered operation
  • Robust design
  • Mechanically stable
    approved by an independent test-ing laboratory, suitable for marine applications
  • Ambient temperature range during operation: -40 … +85 °C
  • Resistant against electromagnetic interferences, meeting stringent SIL requirements
  • 5-year warranty 

Passive isolators with a technologi-cal advantage: fewer parts mean rare failures. For measurement and safety reasons, analog signals are routinely isolated in industrial facilities.

The requirements on plant and safety-related circuits are continuously increasing, for instance because of a growing awareness of occupational safety. Thereby, the technical require-ments on components are also being raised. However, higher functional safety is often bought by more effort and at the expense of availability. This does not have to be the case, as proven by P22400 passive isolator for standard signals.  

Its operating principle enables the implementation of a product that combines high functional safety with high availability in a unique way – a balancing act that would otherwise be hard to achieve.

SIL 3 even in single-channel structure
P22400’s safety functionality is the highly precise, linear transmis-sion of 4 ... 20 mA signals.   

A high level of functional safety can be achieved even in single-channel structure and without diagnostics. For instance, sensors and actuators in safety circuits can be directly connect-ed, requiring no elaborate evaluation equipment for redundant structures. At the same time, the device has a low total failure rate and provides high availability.  
After all, what good is a safety device that will keep turning off (switch to a safe state) and thereby regularly close down the facility it is meant to monitor?  

P22400 is safe and highly available.

 

我们期待您的来信
联系我们

技术细节

AC/DC 电位隔离: 最高 600 V
工作环境 温度: –40 ... 70 °C
功能: 传输/隔离标准信号
输入: 0 ... 20 mA, 4 ... 20 mA
输出: 0 ... 20 mA, 1:1 传输, 4 ... 20 mA
最小测试电压: 5.4 kV AC
电源: 无辅助电源
截止频率: 约 100 Hz
尺寸(宽 x 长 x 高): 12.5 x 99 x 114.5 mm
特点: 也可用作具有两个电气隔离输出 的信号分路器, 变压器电位隔离 0(4) ...20 mA 标 准电流信号, 可靠性高:MTBF 为 1,106 年, 每个设备一个或两个通道, 适用于级别高达 SIL 3 (EN 61508)、PL c/PL e (EN 13849-1) 的安全电路
产品类别: 通用隔离器 / 标准信号隔离器

下载

操作说明书

[7] User Manual (DE, EN, FR, BR)
P224xx P1
Version 05

数据手册

[12549] 数据表
P22400
产品描述 | 规格 | 产品范围

证书

[14467] EU Declaration of Conformity (DE, EN, FR)
No. EU220121A | 2022-01-21
P224** P1
[12403] DNVGL Type Approval Certificate
No. TAA000002H9
Revision No: 3
P224**P1
[12408] Certificate "Functional Safety" (SIL)
P224**P1
No.: 968/FSP 1156.01/20
2020-12-16
[18032] Certificate of Compliance (UL)
No. 20181029-E308146 (ZT180912G)
PROCESS CONTROL EQUIPMENT FOR USE IN HAZARDOUS LOCATIONS
P224**P1
[18033] Certificate of Compliance (UL)
No. 20181015-E340287 (ZT181016F)
PROCESS CONTROL EQUIPMENT, ELECTRICAL
P224**P1

我们的服务

在工艺或应用中使用

高压隔离放大器和变送器,用于采集和转换电流、电压、温度、转速、应变和电阻信号。

相关产品

相关的博客文章

Stack and String Voltage Measurement in Electrolyzers and Fuel Cells

Voltage, current and temperature measurement in electrolyzers with P40000 series high voltage transducers

适用于 Knick 变送器的新型 30 mV 分流电阻

Knick 从现在起为其高压变送器的附件产品系列增添具有 30 mV 电压降的分流电阻
Innovations at InnoTrans 2024

Innovations at InnoTrans 2024 for rolling stock and DC traction power supply

At InnoTrans 2024 Knick presents electrical measurement solutions for rolling stock and DC traction power supply applications

Knick Austria - direct customer contact in Austria from 2024

Reorganization of sales in Austria and new contacts in the field of process analytics and interface technology

Energy storage - the handshake between renewable energy and electric vehicles

Energy storage technology such as battery and hydrogen are critical for growth and continuous development of renewable energy and e-mobility.

P52000VPD 电压检测器能够可靠检测高达 4200 V 的直流电压

新型电压检测器 P52000VPD (Voltage Presence Detection) 能够可靠监控高压应用领域,在达到指定阈值时向下游设备控制器发送信号。

Knick Interface at Battery and Electric & Hybrid Vehicle Technology Expo

Knick will be showcasing high-voltage electrical measurement and signal conversion products.

VariTrans A20340 – 仅需一个隔离放大器的标准信号倍增

The A20340 can output a standard input signal to four calibrated and galvanically isolated outputs in parallel.

Electrical measurement and process analytics for hydrogen production

Knick products optimize hydrogen production in the process and in electrolyser operation.

Condition Monitoring of High-Voltage Motors

Having an active predictive maintenance campaign in place for large rotating equipment can be a key strategy for maximizing process uptime.

Pulse frequency conditioner for speed sensors

The new P16000 from Knick is a pulse frequency conditioner that converts frequency signals from speed sensors into standard signals.

全球最小传感器,高达±2200 V

Knick的VariTrans P 40000系列能对从±50 mV到±3600 V的电压,以及从±100 mA到±20 kA的电流进行可靠测量。经过验证的ProLine系列现在已经扩展到包含传感器P42000D2,它安装在Din导轨上,模块设计紧凑,测量高达2200 V的直流电压。

宽范围电源对于直流电气测量的重要性

Knick生产的众多直流电气测量产品都包含通用的,也称为宽范围电源。这意味着它们将工作在一个相对较宽的电压范围窗口内,如20…253V,交流或直流。

Measuring Photovoltaic Degradation

Photovoltaic (PV) array degradation is an important aspect to consider for system design and installation.

Electrical Measurement Solutions: Control from 480 to 4800 Volts

Voltage and current transducers from Knick bring true control to electrical measurement applications across a wide-range of industries.

Benefits of High Voltage Transducers versus Instrument Transformers

When a need arises to step voltage in a circuit either up or down for purposes of power transmission or distribution, there is no doubt that transformers are essential.

分流器和霍尔效应的技术对比

在许多系统中,为了确保性能和安全,需要测量较大的直流电流。两个例子是静态励磁和轨道牵引动力。这些电流的测量通常采用两种主要原理之一:配有mV级变送器的分流器电阻或霍尔效应传感器来反馈。

MTBF beyond 3000 years: A snap hook for your plant

Failure of equipment on the plant floor can lead to considerable and costly disruption.

Knick Products Comply With UL - What Does That Mean?

There are different assessments and approaches to reach an adequate level of safety. Manufacturers are typically on the “safe” side, if they comply with recognized standards.

High-voltage transducer offers more safety on railway vehicles

The requirements placed on railway vehicles have increased significantly in recent years. Products for rolling stock need to ensure a higher level of functional safety than ever before.

True RMS Measurement with P41000TRMS

Traditional millivolt AC transducers are very susceptible to errors due to their poor insulation and are only designed for pure sinewave measurement.

Functional safety and maximum availability can go together

The requirements on operational and safety-related circuits are continuously growing.