Skip to main content Skip to search Skip to main navigation

A20400 Isolated Standard Signal Conditioner | Input 0(4) … 20 mA | Isolation up to 600 V | Load stop function

Description

A20400 Isolated Standard Signal Conditioner | Input 0(4) … 20 mA | Isolation up to 600 V | Load stop function

The first decoupled passive isolator with load stop function to provide protective separation of 0(4) ... 20 mA standard signals.

  • Extremely compact design
    up to 320 channels per meter
  • 1- and 2-channel versions
    cheap and flexible for a wide range of applications
  • Galvanic isolation
    between the input and output protection against incorrect measurements or damage to the equipment due to parasitic voltages
  • Protective separation up to 300 V AC/DC according to EN 61140
    to protect personnel and equipment
  • Load stop function prevents feedback
    e.g. in the case of an open output circuit
  • No power supply required
    Cost saving due to lower wiring effort no mains interference, no unnecessary self-heating and therefore maximum component service life
  • High accuracy
    No distortion of the measurement signal
  • Maximum reliability
    No repair and failure costs
  • International use
    UL / CSA approvals
  • 5-year warranty

Thanks to an extremely high packing density of up to 320 channels per meter of mounting rail and outstanding technical properties such as protective separation, these isolators leave the competition in the dust – even when it comes to the price-performance ratio!

The A20400 draws its power as a voltage drop directly from the measurement signal without falsifying it. There are no costs for a power supply and wiring. The A20400 has virtually no self-heating that would cause the electronic components to age faster. Together with a patented circuit design, this means maximum reliability. The consequence of this extraordinary long service life: 5-year warranty!

我们期待您的来信
联系我们

技术细节

AC/DC 电位隔离: 最高 600 V
工作环境温度: -20 … 65 °C
功能: 传输/隔离标准信号
输入: 0 ... 20 mA, 4 ... 20 mA
输出: 0 ... 20 mA, 1:1 传输, 4 ... 20 mA
测试电压: 2.5 kV AC
电源: 无辅助电源
截止频率: 约 100 Hz
尺寸(宽 x 长 x 高): 6.2 x 93 x 101 mm
特点: 可靠性高:MTBF(平均无故障时 间)为 1,031 年, 性价比出色, 极高的封装密度,每米安装导轨 支持 320 个通道, 首款具有负载停止功能的去耦无 源隔离器(可选)
产品类别: 通用隔离器 / 标准信号隔离器

下载

操作说明书

[861] User Manual (DE, EN)
A204**
Version 05

小册子

[14160] 手册
产品总览 接口技术

数据手册

[854] 数据表
A20400
产品描述 | 规格 | 产品范围

证书

[11555] Certificate of Compliance (UL)
No. 20181015-E220033; 2018-10-15 (ZT181016K)
POWER CIRCUIT AND MOTOR-MOUNTED APPARATUS
A204** and BL541
[12611] DNV•GL Type Approval Certificate
No. TAA00000AX | 2021-04-06
Revision No: 2
A204**P0

Software

[11876] Knick Produktmakros (.pdf)
ePLAN Electric P8
[12154] Software (.zip)
ePLAN P8 Produktmakros

我们的服务

在工艺或应用中使用

高压隔离放大器和变送器,用于采集和转换电流、电压、温度、转速、应变和电阻信号。
长期稳定的高压隔离放大器、变送器和信号倍增器,适用于要求苛刻的应用

相关的博客文章

带 CondCheck 功能的电导率传感器 SE605H:内置母插,用于连接十进制电阻器

带 CondCheck 功能的电导率传感器 SE605H

借助带 CondCheck 功能的电导率传感器 SE605H,可进行 USP 645 验证,而无需中断测量链。

Sturdy 2-Electrodes Conductivity Sensor SE625 with Coaxial Electrodes made of Titanium

The SE625 ensures reliable and accurate determination of the conductivity of ultrapure water in the semiconductor industry.

Combined pH- and ORP-Sensor SE555X/*-AMSN

Combined pH and ORP measurement in one sensor SE555 saves place and equipment costs for demanding requirements in the chemical industry, the food sector and for hygienic applications.

SE655X 数字式和 SE656X 数字式 - 具有防爆认证的数字式电导率传感器

采用 Memosens 协议的 SE655X 数字式和 SE656X 数字式电导率传感器现已推出防爆认证版本。其材质和结构形式特别适用于化工、造纸和纸浆行业以及工业废水监测。

新型数字式电导率传感器 SE656N

New toroidal Digital Conductivity Sensor with a large measuring range and consisting of PFA for using in aggressive media

How to get the sensor into the process

Sensors as the direct interface to the process must be exactly matched to the chemistry of the measured medium and to the prevailing pressure and temperature conditions.