回到首页
显示全部分类 产品 返回

A20100 Repeater Power Supply | Input 4 … 20 mA | Isolation up to 600 V

Skip image gallery
商品编号: A20100
说明 技术细节 下载 在工艺或应用中使用 相关的博客文章

Description

A20100 Repeater Power Supply | Input 4 … 20 mA | Isolation up to 600 V

Repeater power supply in a 6 mm housing with calibrated switching of output signals, HART transmission and protective separation.

  • Extremely flat
    3-port isolation in a 6 mm modular housing
  • Flexible and extremely precise
    Calibrated switching of output signals
  • Quick and easy configuration
    using lateral DIP switches – easy to access, yet protected against accidental adjustment
  • Low-cost assembly
    Supply of the current loop and galvanic isolation of the measurement signal in one device
  • Protective separation
    up to 300 V according to EN 61140
  • SMART transmitter
    (acc. to HART specification)
  • Cross-connection combs for power supply
    Power supply only wired once for almost any number of parallel repeater power supplies
  • 5-year warranty

Repeater power supply for 2-wire transmitters (current loop powered sensors) in an extremely compact 6-mm housing. The A20100 supplies the transmitter with power and transmits the measurement signal to the output with galvanic isolation and high accuracy.

In case a signal other than the 4 to 20 mA current loop signal is required, the repeater power supply provides various output signals which can be selected via DIP switches. Of course HART signals are transmitted unaltered. The width of just 6 mm also allows use of the repeater power supply in the tightest of spaces.

Knick Products Comply With UL - What Does That Mean?

1月 2018

Interface Technology

UL

There are different assessments and approaches to reach an adequate level of safety. Manufacturers are typically on the “safe” side, if they comply with recognized standards.
more...

我们期待您的来信
联系我们

技术细节

AC/DC 电位隔离: 最高 600 V
工作环境温度: 0 … 55 °C
通信（数字输出）: HART
功能: 2 线制传感器的信号传输和供电
输入: 4 ... 20 mA
输出: 0 ... (±)20mA, 0 ... 10 V, 4 ... 20 mA
电源: 24 V DC
尺寸（宽 x 长 x 高）: 6.2 x 98 x 88 mm
特点: 采用专门调整过的设计，运行 时长特别长，可靠性尤为出 色。MTBF（平均无故障时间）： 280 年, 首款搭载安全隔离功能、配备宽 范围电源的 6 mm 级别标准信号 隔离放大器
标准: EN 61140
产品类别: 通用隔离器 / 标准信号隔离器

下载

操作说明书

[196] User Manual (DE, EN, FR)
A20100 Repeater Power Supply
Version 02

小册子

[14160] 手册
产品总览 接口技术

数据手册

[186] 数据表
A20100 中继器电源
产品描述 | 规格 | 产品范围

证书

[7002] Certificate of Compliance (UL)
No. 20181029-E308146 | 2018-October-29
PROCESS CONTROL EQUIPMENT FOR USE IN HAZARDOUS LOACATIONS
Types A201** and B101**
[11240] Certificate of Compliance (UL)
No. 20181015-E340287 | 2018-October-15
PROCESS CONTROL EQUIPMENT, ELECTRICAL
Types A201** B101** BL560
[12424] EU Declaration of Conformity (DE, EN, FR)
No. EU160502D | 2016-05-02
A20100 F0
[8157] Certificate of Compliance (UL)
No. 20181015-E220033 | 2018-October-15
COMPONENT - POWER CIRCUIT AND MOTOR-MOUNTED APPARATUS
Types A201** and B101**
[8672] Certificate of Compliance (UL)
No. 20181015-E340288 | 2018-October-15
PROCESS CONTROL EQUIPMENT FOR USE IN ZONE CLASSIFIED HAZARDOUS LOCATIONS
Types A201** and B101**

Software

[11876] Knick Produktmakros (.pdf)
ePLAN Electric P8
[12154] Software (.zip)
ePLAN P8 Produktmakros

我们的服务

在工艺或应用中使用

接口技术
高压隔离放大器和变送器，用于采集和转换电流、电压、温度、转速、应变和电阻信号。
产品
长期稳定的高压隔离放大器、变送器和信号倍增器，适用于要求苛刻的应用

相关产品

Skip product gallery
P15000 Isolated Standard Signal Conditioner | Input and Output 0(4) … 20 mA or 0 … 10 V | Isolation up to 1000 V
P15000 Isolated Standard Signal Conditioner | Input and Output 0(4) … 20 mA or 0 … 10 V | Isolation up to 1000 V
商品编码:

P15000

相关的博客文章

带 CondCheck 功能的电导率传感器 SE605H：内置母插，用于连接十进制电阻器

3月 2025

Process Analytics

Pharma, Sensor, Conductivity

带 CondCheck 功能的电导率传感器 SE605H

借助带 CondCheck 功能的电导率传感器 SE605H，可进行 USP 645 验证，而无需中断测量链。

4月 2023

Process Analytics

Conductivity, Phamacy, pH

pH and conductivity measurement in vaccine production
Pharmaceutical contract manufacturer relies on Knick's transmitters for modular production plants for Covid-19 vaccines.

4月 2023

Process Analytics

Sensor, Conductivity, SE625

Sturdy 2-Electrodes Conductivity Sensor SE625 with Coaxial Electrodes made of Titanium
The SE625 ensures reliable and accurate determination of the conductivity of ultrapure water in the semiconductor industry.

11月 2021

Process Analytics

Sensor, Conductivity, SE656, Ex, SE655

SE655X 数字式和 SE656X 数字式 - 具有防爆认证的数字式电导率传感器
采用 Memosens 协议的 SE655X 数字式和 SE656X 数字式电导率传感器现已推出防爆认证版本。其材质和结构形式特别适用于化工、造纸和纸浆行业以及工业废水监测。

5月 2021

Process Analytics

Sensor, Conductivity, SE656, Launch

新型数字式电导率传感器 SE656N
New toroidal Digital Conductivity Sensor with a large measuring range and consisting of PFA for using in aggressive media

2月 2017

Process Analytics

Conductivity

High-Precision Conductivity Measurement at Extreme Temperature Differences
Pharmaceutical manufacturer, EVER Pharma Jena uses the extremely robust conductivity sensors SE605(H) and SE680 with Memosens technology from Knick.