Functional safety and maximum availability can go together

2月 2017 Interface Technology

联系请求到媒体门户编辑使用

The requirements on operational and safety-related circuits are continuously growing. This also affects the technical requirements on components.

Often, functional safety can only be increased with much effort and at the expense of availability. Our P22400 passive signal isolator demonstrates that high safety standards and high availability can go hand in hand.

With its highly precise (0.08% full scale), linear transmission of 4…20 mA signals, the passive isolator ensures a high level of functional safety, even in single-channel structure and without diagnostics. It is certified for applications with a SIL3 safety integrity level according to EN 61508. Sensors and actuators in safety circuits can be connected directly, requiring no elaborate evaluation equipment for redundant structures. The isolator’s robust design ensures excellent availability with an MTBF of 1106 years.

Thanks to loop-powered operation, it contains fewer parts than devices with an auxiliary power unit and the total failure rate is decreased. Furthermore, it is mechanically stable, approved for marine applications, resistant against electromagnetic interferences, and boasts protection against electric shock up to 600 V AC/DC through reinforced insulation.

The test voltage during routine testing is 5.4 kV AC. P22400 is suitable for ambient temperatures between -40 and 85 °C and comes with a five-year warranty.