Knick Products Comply With UL - What Does That Mean?
It is pretty universally agreed upon that electro-technical products, used in critical or dangerous applications, pose no danger, themselves. There are, however, different assessments and approaches to reach an adequate level of safety. Users and manufacturers of such products are typically on the “safe” side, if they comply with recognized standards.
In the US, UL standards are recognized as technical rules with a legal character
Underwriters Laboratories (UL for short) is an independent organization that develops safety standards and examines and certifies products for compliance with these standards. UL is also a Nationally Recognized Testing Laboratory (NRTL), designated by the Occupational Safety and Health Administration (OSHA). The safety of electro technical products concerns electrical safety. But of course, it applies to fire protection as well, because fires can be triggered by electrical energy. In particular, these two aspects, fire safety and electrical safety, will be checked by UL for a product certification.
Knick products sold in the US have been UL certified, either listed as a device by UL or recognized as a component. The products are marked with the corresponding UL mark. In addition to the “Standard for Industrial Control Equipment” UL 508, the standard UL 61010 “Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use” is also applied. UL6 1010 is largely harmonized with the corresponding international standard IEC 61010 and thus also the European standard EN 61010. In a globalized world, “stationary products” are transported across borders and used, so uniform standards are necessary.
For products intended for use in potentially explosive atmospheres, there are additional requirements. It must be ensured that device components cannot produce sparks, which could potentially ignite explosive mixtures. Some of the Knick Interface products are certified by UL “For Use in Zone Classified Hazardous Locations”.
UL certified products can be viewed online at UL’s Online Certification Directory.
Latest Posts
Prodotti assegnati
A20220
Separazione del potenziale AC/DC: Fino a 300 V
A20210
Ingresso: Tensioni di shunt fino a ±1.000 mV, Termocoppie, Resistenze, Termometri a resistenza
Separazione del potenziale AC/DC: Fino a 300 V
P32200
Ingresso: Celle di carico, Estensimetri
Separazione del potenziale AC/DC: Fino a 300 V
P32300
Ingresso: Potenziometri, Resistenze
Separazione del potenziale AC/DC: Fino a 300 V
A26000
Ingresso: 0 ... (±)10 V, 0 ... (±)20 mA
Separazione del potenziale AC/DC: Fino a 1.000 V
P32100
Ingresso: Tensioni di shunt fino a ±1.000 mV, Termocoppie, Resistenze, Termometri a resistenza
Separazione del potenziale AC/DC: Fino a 300 V
P15000
Ingresso: 0 ... 10 V, 4 ... 20 mA, 0 ... 20 mA
Separazione del potenziale AC/DC: Fino a 1.000 V
P22400
Ingresso: 4 ... 20 mA, 0 ... 20 mA
Separazione del potenziale AC/DC: Fino a 600 V
A20100
Ingresso: 4 ... 20 mA
Separazione del potenziale AC/DC: Fino a 600 V
A20230
Ingresso: Potenziometri, Resistenze
Separazione del potenziale AC/DC: Fino a 300 V
Messaggi Correlati
set 2025
Interface Technology
Misurazione funzionalmente sicura delle tensioni elevate nelle applicazioni industriali
set 2025
Interface Technology
Modernizzazione dell'infrastruttura ferroviaria con amplificatori di isolamento ad alta tensione di Knick e sistemi DAQ di Dewesoft
giu 2025
Interface Technology
P45000 SIL 2 / SIL 3: Voltage measurements in applications with functional safety
set 2024
Interface Technology
Stack and String Voltage Measurement in Electrolyzers and Fuel Cells
set 2024
Interface Technology