Skip to main content Skip to search Skip to main navigation

P15000 Isolated Standard Signal Conditioner | Input and Output 0(4) … 20 mA or 0 … 10 V | Isolation up to 1000 V

Description

P15000 Isolated Standard Signal Conditioner | Input and Output 0(4) … 20 mA or 0 … 10 V | Isolation up to 1000 V

The professional signal conditioners. With calibrated range selection and broad-range power supply.

  • Flexible and extremely precise
    Calibrated range selection without complicated readjustments
  • Broad-range power supply
    VariPower 20 … 253 V AC/DC
  • Extremely compact design
    12.5 mm modular housing; up to 80 active isolators per meter of mounting rail
  • Quick and easy configuration
    Housing can be easily opened
  • Pluggable screw terminals
    Simple, time-saving assembly and prewiring of enclosures
  • 3-port separation
    Protection against incorrect measurements or damage
  • Maximum accuracy
  • Specific test report
    following EN 10204 2.2
  • Protective separation
    according to EN 61140 protects against unpermitted high voltages
  • Maximum reliability
    No repair and failure costs
  • 5-year warranty 

Suitable for applications requiring a high level of isolation between the input and output: basic isolation 1000V AC/DC. Test voltage 4000 V AC.

Knick Products Comply With UL - What Does That Mean?

There are different assessments and approaches to reach an adequate level of safety. Manufacturers are typically on the “safe” side, if they comply with recognized standards.

我们期待您的来信
联系我们

技术细节

AC/DC 电位隔离: 最高 1,000 V
工作环境温度: -10 …70 °C
功能: 传输/隔离/转换标准信号
输入: 0 ... 10 V, 0 ... 20 mA, 4 ... 20 mA
输出: 0 ... 10 V, 0 ... 20 mA, 4 ... 20 mA
最小测试电压: 4 kV AC
电源: 22 ... 230 V AC/DC
截止频率: 截止频率可在 10 kHz 或 10 Hz 间切 换,可按要求提供其他截止频率
尺寸(宽 x 长 x 高): 12.5 x 99 x 111 mm
特点: 具有高电位隔离的标准信号专业 隔离放大器, 搭载宽范围电源,可在全球范围 内通用, 经过校准的数控范围选择,切换后 无需调整, 近乎完美的信号转换与模拟信号 处理和传输
产品类别: 通用隔离器 / 标准信号隔离器

下载

操作说明书

[1272] 操作说明书
P15000
Version 05

数据手册

[1264] 数据表
P15000
产品描述 | 规格 | 产品范围

证书

[12322] EU Declaration of Conformity (DE, EN, FR)
P15000 H1 - KTA
No. EU150428A | 2015-04-28
[11437] Certificate of Compliance (UL)
No. 2019-11-22-E340287 (ZT231124D)
Process Control Equipment, Electrical
Series B130** P150** A260** BL513
[11745] DNVGL Type Approval Certificate
No. TAA00002H8
Issue No. 2
P150**H1, P150**F1, A260**F1, A260**H1
[11164] EU Declaration of Conformity (DE, EN, FR)
No. EU220125J | 2022-01-25
A260**F1/H1 | P150**F1/H1 | B130**F1

Software

[11876] Knick Produktmakros (.pdf)
ePLAN Electric P8
[11875] Knick Produktmakros
ePLAN P4 (.pdf)
[12144] Software
ePLAN P4 Produktmakros
[12154] Software (.zip)
ePLAN P8 Produktmakros

我们的服务

在工艺或应用中使用

借助 HIL 测试,可以在各种电池、负载和故障情况下评估牵引逆变器等设备的原型,不必在试验台上或车辆中测试逆变器。

相关的博客文章

带 CondCheck 功能的电导率传感器 SE605H:内置母插,用于连接十进制电阻器

带 CondCheck 功能的电导率传感器 SE605H

借助带 CondCheck 功能的电导率传感器 SE605H,可进行 USP 645 验证,而无需中断测量链。

Sturdy 2-Electrodes Conductivity Sensor SE625 with Coaxial Electrodes made of Titanium

The SE625 ensures reliable and accurate determination of the conductivity of ultrapure water in the semiconductor industry.

Combined pH- and ORP-Sensor SE555X/*-AMSN

Combined pH and ORP measurement in one sensor SE555 saves place and equipment costs for demanding requirements in the chemical industry, the food sector and for hygienic applications.

SE655X 数字式和 SE656X 数字式 - 具有防爆认证的数字式电导率传感器

采用 Memosens 协议的 SE655X 数字式和 SE656X 数字式电导率传感器现已推出防爆认证版本。其材质和结构形式特别适用于化工、造纸和纸浆行业以及工业废水监测。

新型数字式电导率传感器 SE656N

New toroidal Digital Conductivity Sensor with a large measuring range and consisting of PFA for using in aggressive media

How to get the sensor into the process

Sensors as the direct interface to the process must be exactly matched to the chemistry of the measured medium and to the prevailing pressure and temperature conditions.