WG25 Repeater Power Supply Loop-powered | Ex | HART Signal Transmission
Description
For supply of intrinsically safe 2-wire transmitters and SMART transmitters.
- Affordable
Good price due to omission of integrated power supply - No mains supply required
Cost savings due to lower wiring effort, no mains influences - Low power losses
No unnecessary heating in the enclosure - Protective separation
according to EN 61140 Protection of maintenance staff and downstream devices against excessively high voltages - HART transmission
Bidirectional point-to-point transmission of digital data according to the HART specification - EMC tested
RFI suppressed and surge proof, reliable operation even with electromagnetic interference - Maximum reliability
No maintenance work, therefore the related costs are not incurred
The Task
The passive WG25 repeater power supply is loop-powered. It is used for galvanic hazardous-area separation of a 2-wire supply line and transmits both 4 ... 20 mA and HART signals in both directions. With a voltage drop of just 4.2 V, the WG 25 uses the supply optimally so that all common 2-wire transmitters can be connected.
The Advantages
Compared with active repeater power supplies, it has considerable price and reliability advantages.
Multi-channel systems, for example, require only one central, safe-area power supply that does not even need protective separation.
The Technology
Using Knick TransShield technology, the WG25 has specifications that were previously not available in passive repeater power supplies:
- Extremely high reliability, MTTF of over 300 years
- Protective separation, transient protection
- 10 kV test voltage (optional)
- High electromagnetic compatibility
- Extremely low residual ripple and common-mode interference
- Outstanding pulse formation
- HART transmission
- Hazardous/safe area separation
We look forward to hearing from you!
Contact Us
| Communication (Output, Digital): |
HART
|
|---|---|
| Function: |
Signal transmission and supply of 2-wire sensors
|
| Input: |
4 ... 20 mA
|
| Explosion protection: |
Yes
|
| Output: |
4 ... 20 mA
|
| Isolation AC/DC: |
up to 1,000 V
|
| Test Voltage: |
4 kV AC
|
| Power Supply: |
Loop powered
|
| Ambient operating temperature: |
–10 ... 50 °C
|
| Dimensions (W x L x H): |
22.5 x 73.5 x 118.2 mm
|
| Special features: |
ATEX: II (1) G [EEx ia] IIC
Transmission of HART signals
|
| Product Category: |
Isolated Signal Conditioner
|
Norms
Downloads
Certificates
Our service
Used in Process or Applications
Related Products
A20100
Input: 4 ... 20 mA
Isolation AC/DC: up to 600 V
A20400
Input: 4 ... 20 mA, 0 ... 20 mA
Isolation AC/DC: up to 600 V
A21000
Input: 0 ... 10 V, 4 ... 20 mA, 0 ... 20 mA
Isolation AC/DC: up to 300 V
A26000
Input: 0 ... (±)10 V, 0 ... (±)20 mA
Isolation AC/DC: up to 1,000 V
BL513
