WG25 Séparateur d’alimentation sans alimentation auxiliaire | Ex | Transmission des signaux HART
Description
For supply of intrinsically safe 2-wire transmitters and SMART transmitters.
- Affordable
Good price due to omission of integrated power supply - No mains supply required
Cost savings due to lower wiring effort, no mains influences - Low power losses
No unnecessary heating in the enclosure - Protective separation
according to EN 61140 Protection of maintenance staff and downstream devices against excessively high voltages - HART transmission
Bidirectional point-to-point transmission of digital data according to the HART specification - EMC tested
RFI suppressed and surge proof, reliable operation even with electromagnetic interference - Maximum reliability
No maintenance work, therefore the related costs are not incurred
The Task
The passive WG25 repeater power supply is loop-powered. It is used for galvanic hazardous-area separation of a 2-wire supply line and transmits both 4 ... 20 mA and HART signals in both directions. With a voltage drop of just 4.2 V, the WG 25 uses the supply optimally so that all common 2-wire transmitters can be connected.
The Advantages
Compared with active repeater power supplies, it has considerable price and reliability advantages.
Multi-channel systems, for example, require only one central, safe-area power supply that does not even need protective separation.
The Technology
Using Knick TransShield technology, the WG25 has specifications that were previously not available in passive repeater power supplies:
- Extremely high reliability, MTTF of over 300 years
- Protective separation, transient protection
- 10 kV test voltage (optional)
- High electromagnetic compatibility
- Extremely low residual ripple and common-mode interference
- Outstanding pulse formation
- HART transmission
- Hazardous/safe area separation
Nous attendons avec impatience votre réponse!
Nous Contacter
| Séparation des potentiels CA/CC: | Jusqu’à 1 000 |
|---|---|
| Communication (Sortie numérique): | HART |
| Fonction: | Transmission du signal et alimentation des sondes à 2 fils |
| Entrée: | 4 ... 20 mA |
| Protection contre les explosions: | Oui |
| Sortie: | 4 ... 20 mA |
| Tension d'essai: | 4 kV CA |
| Alimentation en tension: | Sans alimentation auxiliaire |
| Température ambiante de service: | -10 ... 50 °C |
| Dimensions (l x L x H): | 22,5 x 73,5 x 118,2 mm |
| Caractéristiques particulières: | ATEX: II (1) G [EEx ia] IIC, Transmission des signaux HART |
| Catégorie de produits: | Séparateur universel / séparateur de signaux normalisés |
