Shunt resistors | High overload capacity | Immune to stray fields
Description
Precise and long-term stable measurement of direct current
For currents up to 20 kA
with a standard program from 10 A to 8 kALow heat loss and low space requirement
due to small measuring voltages from 30 mVPrecise measurement
with accuracy classes 0.2 and 0.5Special versions for energy measuring systems on rail vehicles
according to EN 50463High overload capacity
without residual measurement failureNo influence from current peaks or neighboring cables
due to the measuring principleLow temperature coefficient
and thus small measurement failure due to temperature influencesSafe electrical isolation and short response times
through a combination with measuring transducers from KnickGalvanic isolation between power section and control
up to 3.6 kV working voltage / 15 kV test voltageConversion to standard signals
±20 mA, ±10 V, 4 to 20 mA5 year guarantee
The meticulously produced shunt resistors feature resistor rods made of manganin with low self heating and an exceptionally low temperature coefficient. The variants with a rated voltage drop of 30 mV distinguish themselves from the 50 mV or 60 mV versions thanks to more compact dimensions and significantly lower power dissipation, which greatly reduces the effort required for electrical enclosure cooling. Knick’s transducers and signal conditioners from the P41000, P51000, P29000, P27000, and BL591 series, which are adapted optimally to the shunt resistors, are available for current measurement.
The shunt resistors and associated shunt isolators achieve very good long-term stability, which guarantees the specified accuracy over the normal periods of application of many years. Current peaks do not cause any offset or drift. Protection equipment based on current measurement benefits from the reliability and long-term stability of the measurement and achieves a particularly high level of safety performance.
Nous attendons avec impatience votre réponse!
Nous Contacter
Fonction: | Résistance shunt pour la mesure du courant |
---|---|
Entrée: | 0 ... 1 A jusqu'à 0 ... 20 kA |
Sortie: | 0 ... 30 mV, 0 ... 50 mV, 0 ... 60 mV |
Température ambiante de service: | –10 ... 55 °C |
Dimensions (l x L x H): | Selon la valeur saisie |
Catégorie de produits: | Amplificateur séparateur haute tension, Séparateur universel / séparateur de signaux normalisés |