The P27000 is a Universal Isolation Amplifier that offers the ability to take non-standard output signals produced by devices such as shunt resistors, batteries, and current transducers and convert them to the more standard units and ranges typically needed by PLCs and DCS systems.
This is achieved without any appreciable loss of accuracy, as a gain error of less than 0.8% of the measured value is guaranteed across all 480 calibrated ranges.
The P27000 also allows for rapid control in the application, by way of its rapid response. A 10kHz cutoff frequency helps to ensure that a conversion of 90% of the entire range (T90) is seen in 70 microseconds.
Full 3-way galvanic isolation brings peace of mind that complete electrical separation for up to 1000 V AC/DC will not make its way from any path between input, output and power supply. This is important both for elimination of noise and safety of components.
And speaking of power supplies, the P27000 contains a broad-range supply, which allows it to be powered without the need for an auxiliary device in most situations, from 20 to 253 V AC/DC.
All of this happens in a 12.5mm wide, din-rail mountable unit. A compromise between panel space and performance is not necessary.
General Manager at Knick Interface LLC, USA
Phone: +1 888 62 KNICK